Repairing a bumper?
08-04-2003, 01:23 PM
#16
Guest
Posts: n/a
Re: Repairing a bumper?
As you probably know already, body filler and common glues / adhesives
will not work well on plastic bumpers. 3M has an epoxy intended for use
on polyethylene, polypropylene (which Honda uses in their bumpers) and
other low surface tension plastics. It is in the Scotch-Weld family, and
the part number is DP8005. Hardware stores do not carry it but
industrial supply companies do. I bought it from R. S. Hughes, and they
have locations all over the US. See http://rshughes.com/locationfinder/
When you buy it, also get the gun and a couple of mixing nozzles. The
glue is intended for bonding parts together, but you can also use it to
fill shallow dings and scratches.
Or you could go to http://www.hondaautobodypartstore.com and get a new,
after-market bumper. They are cheap.
DaveC wrote:
>
> On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote
> (in message <bgekft$t7e$1@usc.edu>):
>
> > Dave
> > I myself wanted to repair the bumper so went to Pep Boys and all they had to
> > fill it was the body filler to fill up dents,
> > and when I am doing a search online bumper filler is a part attached on the
> > inner side of the bumper.
> > So I thought I would ask you if you know any specific material to fill the
> > gouge.
>
> Hmm... haven't heard of that part -- inside the bumper -- being called a
> "filler".
>
> No luck finding gouge-filling material, either.
> --
> Dave C
> dave-usenet3016@mailblocks.com
will not work well on plastic bumpers. 3M has an epoxy intended for use
on polyethylene, polypropylene (which Honda uses in their bumpers) and
other low surface tension plastics. It is in the Scotch-Weld family, and
the part number is DP8005. Hardware stores do not carry it but
industrial supply companies do. I bought it from R. S. Hughes, and they
have locations all over the US. See http://rshughes.com/locationfinder/
When you buy it, also get the gun and a couple of mixing nozzles. The
glue is intended for bonding parts together, but you can also use it to
fill shallow dings and scratches.
Or you could go to http://www.hondaautobodypartstore.com and get a new,
after-market bumper. They are cheap.
DaveC wrote:
>
> On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote
> (in message <bgekft$t7e$1@usc.edu>):
>
> > Dave
> > I myself wanted to repair the bumper so went to Pep Boys and all they had to
> > fill it was the body filler to fill up dents,
> > and when I am doing a search online bumper filler is a part attached on the
> > inner side of the bumper.
> > So I thought I would ask you if you know any specific material to fill the
> > gouge.
>
> Hmm... haven't heard of that part -- inside the bumper -- being called a
> "filler".
>
> No luck finding gouge-filling material, either.
> --
> Dave C
> dave-usenet3016@mailblocks.com
08-04-2003, 01:23 PM
#17
Guest
Posts: n/a
Re: Repairing a bumper?
As you probably know already, body filler and common glues / adhesives
will not work well on plastic bumpers. 3M has an epoxy intended for use
on polyethylene, polypropylene (which Honda uses in their bumpers) and
other low surface tension plastics. It is in the Scotch-Weld family, and
the part number is DP8005. Hardware stores do not carry it but
industrial supply companies do. I bought it from R. S. Hughes, and they
have locations all over the US. See http://rshughes.com/locationfinder/
When you buy it, also get the gun and a couple of mixing nozzles. The
glue is intended for bonding parts together, but you can also use it to
fill shallow dings and scratches.
Or you could go to http://www.hondaautobodypartstore.com and get a new,
after-market bumper. They are cheap.
DaveC wrote:
>
> On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote
> (in message <bgekft$t7e$1@usc.edu>):
>
> > Dave
> > I myself wanted to repair the bumper so went to Pep Boys and all they had to
> > fill it was the body filler to fill up dents,
> > and when I am doing a search online bumper filler is a part attached on the
> > inner side of the bumper.
> > So I thought I would ask you if you know any specific material to fill the
> > gouge.
>
> Hmm... haven't heard of that part -- inside the bumper -- being called a
> "filler".
>
> No luck finding gouge-filling material, either.
> --
> Dave C
> dave-usenet3016@mailblocks.com
will not work well on plastic bumpers. 3M has an epoxy intended for use
on polyethylene, polypropylene (which Honda uses in their bumpers) and
other low surface tension plastics. It is in the Scotch-Weld family, and
the part number is DP8005. Hardware stores do not carry it but
industrial supply companies do. I bought it from R. S. Hughes, and they
have locations all over the US. See http://rshughes.com/locationfinder/
When you buy it, also get the gun and a couple of mixing nozzles. The
glue is intended for bonding parts together, but you can also use it to
fill shallow dings and scratches.
Or you could go to http://www.hondaautobodypartstore.com and get a new,
after-market bumper. They are cheap.
DaveC wrote:
>
> On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote
> (in message <bgekft$t7e$1@usc.edu>):
>
> > Dave
> > I myself wanted to repair the bumper so went to Pep Boys and all they had to
> > fill it was the body filler to fill up dents,
> > and when I am doing a search online bumper filler is a part attached on the
> > inner side of the bumper.
> > So I thought I would ask you if you know any specific material to fill the
> > gouge.
>
> Hmm... haven't heard of that part -- inside the bumper -- being called a
> "filler".
>
> No luck finding gouge-filling material, either.
> --
> Dave C
> dave-usenet3016@mailblocks.com
08-06-2003, 12:00 PM
#18
Guest
Posts: n/a
Re: Repairing a bumper?
Well I guess then it seems cheaper and easier to go for the bumper kit
availabe on asseenontv.com
http://www.asseenontv.com/prod-pages...id=ELECTRONICS
Rather than buying the Scotch-Weld which seems expensive along with the
other stuff u need to fix the dents/gouges in the bumper. Anybody any
experience using this kit ?
Thanks Dave and Randolph for inputs.
----------
Fight On !
"Randolph" <trash@junkmail.com> wrote in message
news:3F2E96CE.53994FBC@junkmail.com...
> As you probably know already, body filler and common glues / adhesives
> will not work well on plastic bumpers. 3M has an epoxy intended for use
> on polyethylene, polypropylene (which Honda uses in their bumpers) and
> other low surface tension plastics. It is in the Scotch-Weld family, and
> the part number is DP8005. Hardware stores do not carry it but
> industrial supply companies do. I bought it from R. S. Hughes, and they
> have locations all over the US. See http://rshughes.com/locationfinder/
>
> When you buy it, also get the gun and a couple of mixing nozzles. The
> glue is intended for bonding parts together, but you can also use it to
> fill shallow dings and scratches.
>
> Or you could go to http://www.hondaautobodypartstore.com and get a new,
> after-market bumper. They are cheap.
>
> DaveC wrote:
> >
> > On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote
> > (in message <bgekft$t7e$1@usc.edu>):
> >
> > > Dave
> > > I myself wanted to repair the bumper so went to Pep Boys and all they
had to
> > > fill it was the body filler to fill up dents,
> > > and when I am doing a search online bumper filler is a part attached
on the
> > > inner side of the bumper.
> > > So I thought I would ask you if you know any specific material to fill
the
> > > gouge.
> >
> > Hmm... haven't heard of that part -- inside the bumper -- being called a
> > "filler".
> >
> > No luck finding gouge-filling material, either.
> > --
> > Dave C
> > dave-usenet3016@mailblocks.com
availabe on asseenontv.com
http://www.asseenontv.com/prod-pages...id=ELECTRONICS
Rather than buying the Scotch-Weld which seems expensive along with the
other stuff u need to fix the dents/gouges in the bumper. Anybody any
experience using this kit ?
Thanks Dave and Randolph for inputs.
----------
Fight On !
"Randolph" <trash@junkmail.com> wrote in message
news:3F2E96CE.53994FBC@junkmail.com...
> As you probably know already, body filler and common glues / adhesives
> will not work well on plastic bumpers. 3M has an epoxy intended for use
> on polyethylene, polypropylene (which Honda uses in their bumpers) and
> other low surface tension plastics. It is in the Scotch-Weld family, and
> the part number is DP8005. Hardware stores do not carry it but
> industrial supply companies do. I bought it from R. S. Hughes, and they
> have locations all over the US. See http://rshughes.com/locationfinder/
>
> When you buy it, also get the gun and a couple of mixing nozzles. The
> glue is intended for bonding parts together, but you can also use it to
> fill shallow dings and scratches.
>
> Or you could go to http://www.hondaautobodypartstore.com and get a new,
> after-market bumper. They are cheap.
>
> DaveC wrote:
> >
> > On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote
> > (in message <bgekft$t7e$1@usc.edu>):
> >
> > > Dave
> > > I myself wanted to repair the bumper so went to Pep Boys and all they
had to
> > > fill it was the body filler to fill up dents,
> > > and when I am doing a search online bumper filler is a part attached
on the
> > > inner side of the bumper.
> > > So I thought I would ask you if you know any specific material to fill
the
> > > gouge.
> >
> > Hmm... haven't heard of that part -- inside the bumper -- being called a
> > "filler".
> >
> > No luck finding gouge-filling material, either.
> > --
> > Dave C
> > dave-usenet3016@mailblocks.com
08-06-2003, 12:00 PM
#19
Guest
Posts: n/a
Re: Repairing a bumper?
Well I guess then it seems cheaper and easier to go for the bumper kit
availabe on asseenontv.com
http://www.asseenontv.com/prod-pages...id=ELECTRONICS
Rather than buying the Scotch-Weld which seems expensive along with the
other stuff u need to fix the dents/gouges in the bumper. Anybody any
experience using this kit ?
Thanks Dave and Randolph for inputs.
----------
Fight On !
"Randolph" <trash@junkmail.com> wrote in message
news:3F2E96CE.53994FBC@junkmail.com...
> As you probably know already, body filler and common glues / adhesives
> will not work well on plastic bumpers. 3M has an epoxy intended for use
> on polyethylene, polypropylene (which Honda uses in their bumpers) and
> other low surface tension plastics. It is in the Scotch-Weld family, and
> the part number is DP8005. Hardware stores do not carry it but
> industrial supply companies do. I bought it from R. S. Hughes, and they
> have locations all over the US. See http://rshughes.com/locationfinder/
>
> When you buy it, also get the gun and a couple of mixing nozzles. The
> glue is intended for bonding parts together, but you can also use it to
> fill shallow dings and scratches.
>
> Or you could go to http://www.hondaautobodypartstore.com and get a new,
> after-market bumper. They are cheap.
>
> DaveC wrote:
> >
> > On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote
> > (in message <bgekft$t7e$1@usc.edu>):
> >
> > > Dave
> > > I myself wanted to repair the bumper so went to Pep Boys and all they
had to
> > > fill it was the body filler to fill up dents,
> > > and when I am doing a search online bumper filler is a part attached
on the
> > > inner side of the bumper.
> > > So I thought I would ask you if you know any specific material to fill
the
> > > gouge.
> >
> > Hmm... haven't heard of that part -- inside the bumper -- being called a
> > "filler".
> >
> > No luck finding gouge-filling material, either.
> > --
> > Dave C
> > dave-usenet3016@mailblocks.com
availabe on asseenontv.com
http://www.asseenontv.com/prod-pages...id=ELECTRONICS
Rather than buying the Scotch-Weld which seems expensive along with the
other stuff u need to fix the dents/gouges in the bumper. Anybody any
experience using this kit ?
Thanks Dave and Randolph for inputs.
----------
Fight On !
"Randolph" <trash@junkmail.com> wrote in message
news:3F2E96CE.53994FBC@junkmail.com...
> As you probably know already, body filler and common glues / adhesives
> will not work well on plastic bumpers. 3M has an epoxy intended for use
> on polyethylene, polypropylene (which Honda uses in their bumpers) and
> other low surface tension plastics. It is in the Scotch-Weld family, and
> the part number is DP8005. Hardware stores do not carry it but
> industrial supply companies do. I bought it from R. S. Hughes, and they
> have locations all over the US. See http://rshughes.com/locationfinder/
>
> When you buy it, also get the gun and a couple of mixing nozzles. The
> glue is intended for bonding parts together, but you can also use it to
> fill shallow dings and scratches.
>
> Or you could go to http://www.hondaautobodypartstore.com and get a new,
> after-market bumper. They are cheap.
>
> DaveC wrote:
> >
> > On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote
> > (in message <bgekft$t7e$1@usc.edu>):
> >
> > > Dave
> > > I myself wanted to repair the bumper so went to Pep Boys and all they
had to
> > > fill it was the body filler to fill up dents,
> > > and when I am doing a search online bumper filler is a part attached
on the
> > > inner side of the bumper.
> > > So I thought I would ask you if you know any specific material to fill
the
> > > gouge.
> >
> > Hmm... haven't heard of that part -- inside the bumper -- being called a
> > "filler".
> >
> > No luck finding gouge-filling material, either.
> > --
> > Dave C
> > dave-usenet3016@mailblocks.com
Thread
Thread Starter
Forum
Replies
Last Post
josh k
Honda Civic - Del Sol - CRX
2
12-28-2007 03:49 PM
crazyae
General Automotive Chat
0
12-20-2006 07:20 PM
Cosmin N.
Honda Mailing List
12
02-11-2004 11:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
