Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:mcuqh.59112$qO4.40438@newssvr13.news.prodigy. net... > > > http://www.linkreferral.com/cgi-bin/...oldrefid=20013 > "jim beam" <spamvortex@bad.example.net> wrote in message > news:yNudna2MTMvlxjXYnZ2dnUVZ_qrinZ2d@speakeasy.ne t... >> >> dude, it's not the freakin' wire, it's the freakin' unit. led's draw >> /very/ little current. skinny wire works just fine /if/ the led's are >> fine. go fix the unit and suddenly all your wiring problems will >> disappear. > > Oh, so how do I go about that? Do I need to get a new LED? > My guess is that the wire itself is shorted to ground, most likely where it can be pinched or goes through a small hole. I'm not familiar with the latest in LEDs, but for the most part the active device needs resistance in series to limit current. That would probably prevent the LED from appearing as a short on the supply. Mike |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:mcuqh.59112$qO4.40438@newssvr13.news.prodigy. net... > > > http://www.linkreferral.com/cgi-bin/...oldrefid=20013 > "jim beam" <spamvortex@bad.example.net> wrote in message > news:yNudna2MTMvlxjXYnZ2dnUVZ_qrinZ2d@speakeasy.ne t... >> >> dude, it's not the freakin' wire, it's the freakin' unit. led's draw >> /very/ little current. skinny wire works just fine /if/ the led's are >> fine. go fix the unit and suddenly all your wiring problems will >> disappear. > > Oh, so how do I go about that? Do I need to get a new LED? > My guess is that the wire itself is shorted to ground, most likely where it can be pinched or goes through a small hole. I'm not familiar with the latest in LEDs, but for the most part the active device needs resistance in series to limit current. That would probably prevent the LED from appearing as a short on the supply. Mike |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... > > > So I guess I might just buy a new one. The guy I bought it from on Ebay > has been kicked off. He offered a lifetime warranty, but you need a > return authorization number first, but it is impossible to contact him via > email or phone. They are Exotic Truck and Auto Gear. Damn them! I > should have bought Honda OEM like I started to... > Before giving up, inspect every place the wire goes through tight spots, either in metal or with the ground wire along with it. Pinched wires are common sources of shorts. Mike |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... > > > So I guess I might just buy a new one. The guy I bought it from on Ebay > has been kicked off. He offered a lifetime warranty, but you need a > return authorization number first, but it is impossible to contact him via > email or phone. They are Exotic Truck and Auto Gear. Damn them! I > should have bought Honda OEM like I started to... > Before giving up, inspect every place the wire goes through tight spots, either in metal or with the ground wire along with it. Pinched wires are common sources of shorts. Mike |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... > > > So I guess I might just buy a new one. The guy I bought it from on Ebay > has been kicked off. He offered a lifetime warranty, but you need a > return authorization number first, but it is impossible to contact him via > email or phone. They are Exotic Truck and Auto Gear. Damn them! I > should have bought Honda OEM like I started to... > Before giving up, inspect every place the wire goes through tight spots, either in metal or with the ground wire along with it. Pinched wires are common sources of shorts. Mike |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... > > > So I guess I might just buy a new one. The guy I bought it from on Ebay > has been kicked off. He offered a lifetime warranty, but you need a > return authorization number first, but it is impossible to contact him via > email or phone. They are Exotic Truck and Auto Gear. Damn them! I > should have bought Honda OEM like I started to... > Before giving up, inspect every place the wire goes through tight spots, either in metal or with the ground wire along with it. Pinched wires are common sources of shorts. Mike |
Re: Spoiler LED Wire type
-- This post is Sponsored by: www.overheadsoft.com http://www.linkreferral.com/cgi-bin/...oldrefid=20013 "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message news:u_udncJuosNokTbYnZ2dnUVZ_rWnnZ2d@sedona.net.. . > "Guest" <llcoolj@comcast.com> wrote in message > news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... >> >> >> So I guess I might just buy a new one. The guy I bought it from on Ebay >> has been kicked off. He offered a lifetime warranty, but you need a >> return authorization number first, but it is impossible to contact him >> via email or phone. They are Exotic Truck and Auto Gear. Damn them! I >> should have bought Honda OEM like I started to... >> > Before giving up, inspect every place the wire goes through tight spots, > either in metal or with the ground wire along with it. Pinched wires are > common sources of shorts. > > Mike > Oh? I did do the plastic tie things all over. Maybe I put them on too tightly? The rubber grommet that the wire goes through was not exactly clear. I assumed that since it was rubber, it should no harm. |
Re: Spoiler LED Wire type
-- This post is Sponsored by: www.overheadsoft.com http://www.linkreferral.com/cgi-bin/...oldrefid=20013 "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message news:u_udncJuosNokTbYnZ2dnUVZ_rWnnZ2d@sedona.net.. . > "Guest" <llcoolj@comcast.com> wrote in message > news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... >> >> >> So I guess I might just buy a new one. The guy I bought it from on Ebay >> has been kicked off. He offered a lifetime warranty, but you need a >> return authorization number first, but it is impossible to contact him >> via email or phone. They are Exotic Truck and Auto Gear. Damn them! I >> should have bought Honda OEM like I started to... >> > Before giving up, inspect every place the wire goes through tight spots, > either in metal or with the ground wire along with it. Pinched wires are > common sources of shorts. > > Mike > Oh? I did do the plastic tie things all over. Maybe I put them on too tightly? The rubber grommet that the wire goes through was not exactly clear. I assumed that since it was rubber, it should no harm. |
Re: Spoiler LED Wire type
-- This post is Sponsored by: www.overheadsoft.com http://www.linkreferral.com/cgi-bin/...oldrefid=20013 "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message news:u_udncJuosNokTbYnZ2dnUVZ_rWnnZ2d@sedona.net.. . > "Guest" <llcoolj@comcast.com> wrote in message > news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... >> >> >> So I guess I might just buy a new one. The guy I bought it from on Ebay >> has been kicked off. He offered a lifetime warranty, but you need a >> return authorization number first, but it is impossible to contact him >> via email or phone. They are Exotic Truck and Auto Gear. Damn them! I >> should have bought Honda OEM like I started to... >> > Before giving up, inspect every place the wire goes through tight spots, > either in metal or with the ground wire along with it. Pinched wires are > common sources of shorts. > > Mike > Oh? I did do the plastic tie things all over. Maybe I put them on too tightly? The rubber grommet that the wire goes through was not exactly clear. I assumed that since it was rubber, it should no harm. |
Re: Spoiler LED Wire type
-- This post is Sponsored by: www.overheadsoft.com http://www.linkreferral.com/cgi-bin/...oldrefid=20013 "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message news:u_udncJuosNokTbYnZ2dnUVZ_rWnnZ2d@sedona.net.. . > "Guest" <llcoolj@comcast.com> wrote in message > news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... >> >> >> So I guess I might just buy a new one. The guy I bought it from on Ebay >> has been kicked off. He offered a lifetime warranty, but you need a >> return authorization number first, but it is impossible to contact him >> via email or phone. They are Exotic Truck and Auto Gear. Damn them! I >> should have bought Honda OEM like I started to... >> > Before giving up, inspect every place the wire goes through tight spots, > either in metal or with the ground wire along with it. Pinched wires are > common sources of shorts. > > Mike > Oh? I did do the plastic tie things all over. Maybe I put them on too tightly? The rubber grommet that the wire goes through was not exactly clear. I assumed that since it was rubber, it should no harm. |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:LSVqh.67717$wP1.7441@newssvr14.news.prodigy.n et... > > > -- > This post is Sponsored by: www.overheadsoft.com > > http://www.linkreferral.com/cgi-bin/...oldrefid=20013 > "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message > news:u_udncJuosNokTbYnZ2dnUVZ_rWnnZ2d@sedona.net.. . >> "Guest" <llcoolj@comcast.com> wrote in message >> news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... >>> >>> >>> So I guess I might just buy a new one. The guy I bought it from on Ebay >>> has been kicked off. He offered a lifetime warranty, but you need a >>> return authorization number first, but it is impossible to contact him >>> via email or phone. They are Exotic Truck and Auto Gear. Damn them! I >>> should have bought Honda OEM like I started to... >>> >> Before giving up, inspect every place the wire goes through tight spots, >> either in metal or with the ground wire along with it. Pinched wires are >> common sources of shorts. >> >> Mike >> > > Oh? I did do the plastic tie things all over. Maybe I put them on too > tightly? The rubber grommet that the wire goes through was not exactly > clear. I assumed that since it was rubber, it should no harm. > If the wire is soft, the ties really could be too tight. Carefully cut them and check it out again. The grommet should be okay. Mike |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:LSVqh.67717$wP1.7441@newssvr14.news.prodigy.n et... > > > -- > This post is Sponsored by: www.overheadsoft.com > > http://www.linkreferral.com/cgi-bin/...oldrefid=20013 > "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message > news:u_udncJuosNokTbYnZ2dnUVZ_rWnnZ2d@sedona.net.. . >> "Guest" <llcoolj@comcast.com> wrote in message >> news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... >>> >>> >>> So I guess I might just buy a new one. The guy I bought it from on Ebay >>> has been kicked off. He offered a lifetime warranty, but you need a >>> return authorization number first, but it is impossible to contact him >>> via email or phone. They are Exotic Truck and Auto Gear. Damn them! I >>> should have bought Honda OEM like I started to... >>> >> Before giving up, inspect every place the wire goes through tight spots, >> either in metal or with the ground wire along with it. Pinched wires are >> common sources of shorts. >> >> Mike >> > > Oh? I did do the plastic tie things all over. Maybe I put them on too > tightly? The rubber grommet that the wire goes through was not exactly > clear. I assumed that since it was rubber, it should no harm. > If the wire is soft, the ties really could be too tight. Carefully cut them and check it out again. The grommet should be okay. Mike |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:LSVqh.67717$wP1.7441@newssvr14.news.prodigy.n et... > > > -- > This post is Sponsored by: www.overheadsoft.com > > http://www.linkreferral.com/cgi-bin/...oldrefid=20013 > "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message > news:u_udncJuosNokTbYnZ2dnUVZ_rWnnZ2d@sedona.net.. . >> "Guest" <llcoolj@comcast.com> wrote in message >> news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... >>> >>> >>> So I guess I might just buy a new one. The guy I bought it from on Ebay >>> has been kicked off. He offered a lifetime warranty, but you need a >>> return authorization number first, but it is impossible to contact him >>> via email or phone. They are Exotic Truck and Auto Gear. Damn them! I >>> should have bought Honda OEM like I started to... >>> >> Before giving up, inspect every place the wire goes through tight spots, >> either in metal or with the ground wire along with it. Pinched wires are >> common sources of shorts. >> >> Mike >> > > Oh? I did do the plastic tie things all over. Maybe I put them on too > tightly? The rubber grommet that the wire goes through was not exactly > clear. I assumed that since it was rubber, it should no harm. > If the wire is soft, the ties really could be too tight. Carefully cut them and check it out again. The grommet should be okay. Mike |
Re: Spoiler LED Wire type
"Guest" <llcoolj@comcast.com> wrote in message
news:LSVqh.67717$wP1.7441@newssvr14.news.prodigy.n et... > > > -- > This post is Sponsored by: www.overheadsoft.com > > http://www.linkreferral.com/cgi-bin/...oldrefid=20013 > "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message > news:u_udncJuosNokTbYnZ2dnUVZ_rWnnZ2d@sedona.net.. . >> "Guest" <llcoolj@comcast.com> wrote in message >> news:ffuqh.59113$qO4.52367@newssvr13.news.prodigy. net... >>> >>> >>> So I guess I might just buy a new one. The guy I bought it from on Ebay >>> has been kicked off. He offered a lifetime warranty, but you need a >>> return authorization number first, but it is impossible to contact him >>> via email or phone. They are Exotic Truck and Auto Gear. Damn them! I >>> should have bought Honda OEM like I started to... >>> >> Before giving up, inspect every place the wire goes through tight spots, >> either in metal or with the ground wire along with it. Pinched wires are >> common sources of shorts. >> >> Mike >> > > Oh? I did do the plastic tie things all over. Maybe I put them on too > tightly? The rubber grommet that the wire goes through was not exactly > clear. I assumed that since it was rubber, it should no harm. > If the wire is soft, the ties really could be too tight. Carefully cut them and check it out again. The grommet should be okay. Mike |
All times are GMT -4. The time now is 08:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands