stalling at ignition
12-12-2003, 09:50 PM
#31
Guest
Posts: n/a
Re: stalling at ignition
John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
news:PaqCb.91370$655.13558149@news4.srv.hcvlny.cv. net:
> Not exactly sure if it does that or not. I know that when I try
> to start it it will fire then die in the span or time while still
> turning the ignition.
> The question is, why does the fuel pump not engage (after it warms
> up) like it does in initial rounds of firing? Where can I get
> information on the fuel pump relay online.
> Searching stuff with google and altavista only brings up add
> web sites. Searching for information on automobile repairs
> is terrible on the web!
>
> Thanks,
> John
>
>
The fuel system holds enough pressure for the car to briefly start,but not
enough to maintain running unless the fuel pump keeps the pressure up.
The solder problem on the relay PCB makes it -intermittent-,which is why it
works sometimes,but especially not when its hot out.
In all the time you've spent on these posts,you could have resoldered the
relay and discovered if it was the problem or not.
--
Jim Yanik,NRA member
jyanik-at-kua.net
news:PaqCb.91370$655.13558149@news4.srv.hcvlny.cv. net:
> Not exactly sure if it does that or not. I know that when I try
> to start it it will fire then die in the span or time while still
> turning the ignition.
> The question is, why does the fuel pump not engage (after it warms
> up) like it does in initial rounds of firing? Where can I get
> information on the fuel pump relay online.
> Searching stuff with google and altavista only brings up add
> web sites. Searching for information on automobile repairs
> is terrible on the web!
>
> Thanks,
> John
>
>
The fuel system holds enough pressure for the car to briefly start,but not
enough to maintain running unless the fuel pump keeps the pressure up.
The solder problem on the relay PCB makes it -intermittent-,which is why it
works sometimes,but especially not when its hot out.
In all the time you've spent on these posts,you could have resoldered the
relay and discovered if it was the problem or not.
--
Jim Yanik,NRA member
jyanik-at-kua.net
12-12-2003, 09:50 PM
#32
Guest
Posts: n/a
Re: stalling at ignition
John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
news:PaqCb.91370$655.13558149@news4.srv.hcvlny.cv. net:
> Not exactly sure if it does that or not. I know that when I try
> to start it it will fire then die in the span or time while still
> turning the ignition.
> The question is, why does the fuel pump not engage (after it warms
> up) like it does in initial rounds of firing? Where can I get
> information on the fuel pump relay online.
> Searching stuff with google and altavista only brings up add
> web sites. Searching for information on automobile repairs
> is terrible on the web!
>
> Thanks,
> John
>
>
The fuel system holds enough pressure for the car to briefly start,but not
enough to maintain running unless the fuel pump keeps the pressure up.
The solder problem on the relay PCB makes it -intermittent-,which is why it
works sometimes,but especially not when its hot out.
In all the time you've spent on these posts,you could have resoldered the
relay and discovered if it was the problem or not.
--
Jim Yanik,NRA member
jyanik-at-kua.net
news:PaqCb.91370$655.13558149@news4.srv.hcvlny.cv. net:
> Not exactly sure if it does that or not. I know that when I try
> to start it it will fire then die in the span or time while still
> turning the ignition.
> The question is, why does the fuel pump not engage (after it warms
> up) like it does in initial rounds of firing? Where can I get
> information on the fuel pump relay online.
> Searching stuff with google and altavista only brings up add
> web sites. Searching for information on automobile repairs
> is terrible on the web!
>
> Thanks,
> John
>
>
The fuel system holds enough pressure for the car to briefly start,but not
enough to maintain running unless the fuel pump keeps the pressure up.
The solder problem on the relay PCB makes it -intermittent-,which is why it
works sometimes,but especially not when its hot out.
In all the time you've spent on these posts,you could have resoldered the
relay and discovered if it was the problem or not.
--
Jim Yanik,NRA member
jyanik-at-kua.net
12-12-2003, 09:50 PM
#33
Guest
Posts: n/a
Re: stalling at ignition
John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
news:PaqCb.91370$655.13558149@news4.srv.hcvlny.cv. net:
> Not exactly sure if it does that or not. I know that when I try
> to start it it will fire then die in the span or time while still
> turning the ignition.
> The question is, why does the fuel pump not engage (after it warms
> up) like it does in initial rounds of firing? Where can I get
> information on the fuel pump relay online.
> Searching stuff with google and altavista only brings up add
> web sites. Searching for information on automobile repairs
> is terrible on the web!
>
> Thanks,
> John
>
>
The fuel system holds enough pressure for the car to briefly start,but not
enough to maintain running unless the fuel pump keeps the pressure up.
The solder problem on the relay PCB makes it -intermittent-,which is why it
works sometimes,but especially not when its hot out.
In all the time you've spent on these posts,you could have resoldered the
relay and discovered if it was the problem or not.
--
Jim Yanik,NRA member
jyanik-at-kua.net
news:PaqCb.91370$655.13558149@news4.srv.hcvlny.cv. net:
> Not exactly sure if it does that or not. I know that when I try
> to start it it will fire then die in the span or time while still
> turning the ignition.
> The question is, why does the fuel pump not engage (after it warms
> up) like it does in initial rounds of firing? Where can I get
> information on the fuel pump relay online.
> Searching stuff with google and altavista only brings up add
> web sites. Searching for information on automobile repairs
> is terrible on the web!
>
> Thanks,
> John
>
>
The fuel system holds enough pressure for the car to briefly start,but not
enough to maintain running unless the fuel pump keeps the pressure up.
The solder problem on the relay PCB makes it -intermittent-,which is why it
works sometimes,but especially not when its hot out.
In all the time you've spent on these posts,you could have resoldered the
relay and discovered if it was the problem or not.
--
Jim Yanik,NRA member
jyanik-at-kua.net
01-04-2004, 05:22 PM
#34
Guest
Posts: n/a
Re: stalling at ignition
It could very well be the engine's ECU
Humidity effecting the resonse of electric signals is common problem
in a computer
Especially one that was sealed in a box, and over time the seals
are starting to deteriorate
Best of Luck
Phill
On Wed, 10 Dec 2003 17:35:23 GMT, John Lutz
<linuxbeatsmicrosoft@nyc.com> wrote:
>if the car (honda accord ex 1993) stalls at ignition or
>turns forever, what can that be? I've tried looking at the main relay,
>it seems ok. Hotter weather the car is worse off, especially
>with humidity. If I throw it into neutral then back to
>park I also have better 'luck'.
>
>PS- thanks for the advice from last time. My new server
>only allows two days then makes the messages 'illegal'.
>
>Regards,
>John
Humidity effecting the resonse of electric signals is common problem
in a computer
Especially one that was sealed in a box, and over time the seals
are starting to deteriorate
Best of Luck
Phill
On Wed, 10 Dec 2003 17:35:23 GMT, John Lutz
<linuxbeatsmicrosoft@nyc.com> wrote:
>if the car (honda accord ex 1993) stalls at ignition or
>turns forever, what can that be? I've tried looking at the main relay,
>it seems ok. Hotter weather the car is worse off, especially
>with humidity. If I throw it into neutral then back to
>park I also have better 'luck'.
>
>PS- thanks for the advice from last time. My new server
>only allows two days then makes the messages 'illegal'.
>
>Regards,
>John
01-04-2004, 05:22 PM
#35
Guest
Posts: n/a
Re: stalling at ignition
It could very well be the engine's ECU
Humidity effecting the resonse of electric signals is common problem
in a computer
Especially one that was sealed in a box, and over time the seals
are starting to deteriorate
Best of Luck
Phill
On Wed, 10 Dec 2003 17:35:23 GMT, John Lutz
<linuxbeatsmicrosoft@nyc.com> wrote:
>if the car (honda accord ex 1993) stalls at ignition or
>turns forever, what can that be? I've tried looking at the main relay,
>it seems ok. Hotter weather the car is worse off, especially
>with humidity. If I throw it into neutral then back to
>park I also have better 'luck'.
>
>PS- thanks for the advice from last time. My new server
>only allows two days then makes the messages 'illegal'.
>
>Regards,
>John
Humidity effecting the resonse of electric signals is common problem
in a computer
Especially one that was sealed in a box, and over time the seals
are starting to deteriorate
Best of Luck
Phill
On Wed, 10 Dec 2003 17:35:23 GMT, John Lutz
<linuxbeatsmicrosoft@nyc.com> wrote:
>if the car (honda accord ex 1993) stalls at ignition or
>turns forever, what can that be? I've tried looking at the main relay,
>it seems ok. Hotter weather the car is worse off, especially
>with humidity. If I throw it into neutral then back to
>park I also have better 'luck'.
>
>PS- thanks for the advice from last time. My new server
>only allows two days then makes the messages 'illegal'.
>
>Regards,
>John
01-04-2004, 05:22 PM
#36
Guest
Posts: n/a
Re: stalling at ignition
It could very well be the engine's ECU
Humidity effecting the resonse of electric signals is common problem
in a computer
Especially one that was sealed in a box, and over time the seals
are starting to deteriorate
Best of Luck
Phill
On Wed, 10 Dec 2003 17:35:23 GMT, John Lutz
<linuxbeatsmicrosoft@nyc.com> wrote:
>if the car (honda accord ex 1993) stalls at ignition or
>turns forever, what can that be? I've tried looking at the main relay,
>it seems ok. Hotter weather the car is worse off, especially
>with humidity. If I throw it into neutral then back to
>park I also have better 'luck'.
>
>PS- thanks for the advice from last time. My new server
>only allows two days then makes the messages 'illegal'.
>
>Regards,
>John
Humidity effecting the resonse of electric signals is common problem
in a computer
Especially one that was sealed in a box, and over time the seals
are starting to deteriorate
Best of Luck
Phill
On Wed, 10 Dec 2003 17:35:23 GMT, John Lutz
<linuxbeatsmicrosoft@nyc.com> wrote:
>if the car (honda accord ex 1993) stalls at ignition or
>turns forever, what can that be? I've tried looking at the main relay,
>it seems ok. Hotter weather the car is worse off, especially
>with humidity. If I throw it into neutral then back to
>park I also have better 'luck'.
>
>PS- thanks for the advice from last time. My new server
>only allows two days then makes the messages 'illegal'.
>
>Regards,
>John
01-04-2004, 08:38 PM
#37
Guest
Posts: n/a
Re: stalling at ignition
John Lutz wrote:
>
> Jim Yanik wrote:
> > John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
> > news:vPIBb.21314$655.2133471@news4.srv.hcvlny.cv.n et:
> >
> >
> >>if the car (honda accord ex 1993) stalls at ignition or
> >>turns forever, what can that be? I've tried looking at the main relay,
> >>it seems ok. Hotter weather the car is worse off, especially
> >>with humidity. If I throw it into neutral then back to
> >>park I also have better 'luck'.
> >>
> >>PS- thanks for the advice from last time. My new server
> >>only allows two days then makes the messages 'illegal'.
> >>
> >>Regards,
> >>John
======================
John,
Read this site carefully. It seems to be your problem.
http://members.rogers.com/john-ings/MainRelay.HTM
'Curly'
==============
>
> Jim Yanik wrote:
> > John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
> > news:vPIBb.21314$655.2133471@news4.srv.hcvlny.cv.n et:
> >
> >
> >>if the car (honda accord ex 1993) stalls at ignition or
> >>turns forever, what can that be? I've tried looking at the main relay,
> >>it seems ok. Hotter weather the car is worse off, especially
> >>with humidity. If I throw it into neutral then back to
> >>park I also have better 'luck'.
> >>
> >>PS- thanks for the advice from last time. My new server
> >>only allows two days then makes the messages 'illegal'.
> >>
> >>Regards,
> >>John
======================
John,
Read this site carefully. It seems to be your problem.
http://members.rogers.com/john-ings/MainRelay.HTM
'Curly'
==============
01-04-2004, 08:38 PM
#38
Guest
Posts: n/a
Re: stalling at ignition
John Lutz wrote:
>
> Jim Yanik wrote:
> > John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
> > news:vPIBb.21314$655.2133471@news4.srv.hcvlny.cv.n et:
> >
> >
> >>if the car (honda accord ex 1993) stalls at ignition or
> >>turns forever, what can that be? I've tried looking at the main relay,
> >>it seems ok. Hotter weather the car is worse off, especially
> >>with humidity. If I throw it into neutral then back to
> >>park I also have better 'luck'.
> >>
> >>PS- thanks for the advice from last time. My new server
> >>only allows two days then makes the messages 'illegal'.
> >>
> >>Regards,
> >>John
======================
John,
Read this site carefully. It seems to be your problem.
http://members.rogers.com/john-ings/MainRelay.HTM
'Curly'
==============
>
> Jim Yanik wrote:
> > John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
> > news:vPIBb.21314$655.2133471@news4.srv.hcvlny.cv.n et:
> >
> >
> >>if the car (honda accord ex 1993) stalls at ignition or
> >>turns forever, what can that be? I've tried looking at the main relay,
> >>it seems ok. Hotter weather the car is worse off, especially
> >>with humidity. If I throw it into neutral then back to
> >>park I also have better 'luck'.
> >>
> >>PS- thanks for the advice from last time. My new server
> >>only allows two days then makes the messages 'illegal'.
> >>
> >>Regards,
> >>John
======================
John,
Read this site carefully. It seems to be your problem.
http://members.rogers.com/john-ings/MainRelay.HTM
'Curly'
==============
01-04-2004, 08:38 PM
#39
Guest
Posts: n/a
Re: stalling at ignition
John Lutz wrote:
>
> Jim Yanik wrote:
> > John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
> > news:vPIBb.21314$655.2133471@news4.srv.hcvlny.cv.n et:
> >
> >
> >>if the car (honda accord ex 1993) stalls at ignition or
> >>turns forever, what can that be? I've tried looking at the main relay,
> >>it seems ok. Hotter weather the car is worse off, especially
> >>with humidity. If I throw it into neutral then back to
> >>park I also have better 'luck'.
> >>
> >>PS- thanks for the advice from last time. My new server
> >>only allows two days then makes the messages 'illegal'.
> >>
> >>Regards,
> >>John
======================
John,
Read this site carefully. It seems to be your problem.
http://members.rogers.com/john-ings/MainRelay.HTM
'Curly'
==============
>
> Jim Yanik wrote:
> > John Lutz <linuxbeatsmicrosoft@nyc.com> wrote in
> > news:vPIBb.21314$655.2133471@news4.srv.hcvlny.cv.n et:
> >
> >
> >>if the car (honda accord ex 1993) stalls at ignition or
> >>turns forever, what can that be? I've tried looking at the main relay,
> >>it seems ok. Hotter weather the car is worse off, especially
> >>with humidity. If I throw it into neutral then back to
> >>park I also have better 'luck'.
> >>
> >>PS- thanks for the advice from last time. My new server
> >>only allows two days then makes the messages 'illegal'.
> >>
> >>Regards,
> >>John
======================
John,
Read this site carefully. It seems to be your problem.
http://members.rogers.com/john-ings/MainRelay.HTM
'Curly'
==============
Thread
Thread Starter
Forum
Replies
Last Post
FrankSwaney@gmail.com
Hyundai Mailing List
12
05-13-2006 09:51 PM
FrankSwaney@gmail.com
Hyundai Mailing List
0
05-04-2006 12:02 AM
Sidharth Kapileshwar
Hyundai Mailing List
5
10-20-2004 02:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
