sticky gas pedal on 88 CRX si
09-22-2003, 02:39 PM
#1
Guest
Posts: n/a
sticky gas pedal on 88 CRX si
I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
be sticky with the engine shut off or when it is idling. Only when the
car is in gear. Can anyone give me any idea what the problem could be?
I have played around with the slack on the cable, but that did
nothing.
--
dean
------------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the car audio community.
http://www.realcaraudio.com
dean's Profile: http://www.realcaraudio.com/forums/m...fo&userid=1624
View this thread: http://www.realcaraudio.com/forums/s...?threadid=9076
09-22-2003, 09:10 PM
#2
Guest
Posts: n/a
Re: sticky gas pedal on 88 CRX si
On Mon, 22 Sep 2003 18:39:00 GMT, dean <dean.u67km@realcaraudio.com>
wrote:
>
>I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
>be sticky with the engine shut off or when it is idling. Only when the
>car is in gear. Can anyone give me any idea what the problem could be?
>I have played around with the slack on the cable, but that did
>nothing.
I know of two possible causes.....
You could have a carbon buildup around the throttle plate (common on
96-98 Accords) or you could have a bad ground to the engine. Is the
wire from the valve cover to the core support there and tight at each
end? If not then your throttle cable could be making the ground for
the engine getting hot and melting into the cable housing.
wrote:
>
>I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
>be sticky with the engine shut off or when it is idling. Only when the
>car is in gear. Can anyone give me any idea what the problem could be?
>I have played around with the slack on the cable, but that did
>nothing.
I know of two possible causes.....
You could have a carbon buildup around the throttle plate (common on
96-98 Accords) or you could have a bad ground to the engine. Is the
wire from the valve cover to the core support there and tight at each
end? If not then your throttle cable could be making the ground for
the engine getting hot and melting into the cable housing.
09-22-2003, 09:10 PM
#3
Guest
Posts: n/a
Re: sticky gas pedal on 88 CRX si
On Mon, 22 Sep 2003 18:39:00 GMT, dean <dean.u67km@realcaraudio.com>
wrote:
>
>I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
>be sticky with the engine shut off or when it is idling. Only when the
>car is in gear. Can anyone give me any idea what the problem could be?
>I have played around with the slack on the cable, but that did
>nothing.
I know of two possible causes.....
You could have a carbon buildup around the throttle plate (common on
96-98 Accords) or you could have a bad ground to the engine. Is the
wire from the valve cover to the core support there and tight at each
end? If not then your throttle cable could be making the ground for
the engine getting hot and melting into the cable housing.
wrote:
>
>I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
>be sticky with the engine shut off or when it is idling. Only when the
>car is in gear. Can anyone give me any idea what the problem could be?
>I have played around with the slack on the cable, but that did
>nothing.
I know of two possible causes.....
You could have a carbon buildup around the throttle plate (common on
96-98 Accords) or you could have a bad ground to the engine. Is the
wire from the valve cover to the core support there and tight at each
end? If not then your throttle cable could be making the ground for
the engine getting hot and melting into the cable housing.
09-22-2003, 09:10 PM
#4
Guest
Posts: n/a
Re: sticky gas pedal on 88 CRX si
On Mon, 22 Sep 2003 18:39:00 GMT, dean <dean.u67km@realcaraudio.com>
wrote:
>
>I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
>be sticky with the engine shut off or when it is idling. Only when the
>car is in gear. Can anyone give me any idea what the problem could be?
>I have played around with the slack on the cable, but that did
>nothing.
I know of two possible causes.....
You could have a carbon buildup around the throttle plate (common on
96-98 Accords) or you could have a bad ground to the engine. Is the
wire from the valve cover to the core support there and tight at each
end? If not then your throttle cable could be making the ground for
the engine getting hot and melting into the cable housing.
wrote:
>
>I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
>be sticky with the engine shut off or when it is idling. Only when the
>car is in gear. Can anyone give me any idea what the problem could be?
>I have played around with the slack on the cable, but that did
>nothing.
I know of two possible causes.....
You could have a carbon buildup around the throttle plate (common on
96-98 Accords) or you could have a bad ground to the engine. Is the
wire from the valve cover to the core support there and tight at each
end? If not then your throttle cable could be making the ground for
the engine getting hot and melting into the cable housing.
09-22-2003, 11:28 PM
#5
Guest
Posts: n/a
Re: sticky gas pedal on 88 CRX si
"dean" <dean.u67km@realcaraudio.com> wrote in message
news:dean.u67km@realcaraudio.com...
>
> I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
> be sticky with the engine shut off or when it is idling. Only when the
> car is in gear. Can anyone give me any idea what the problem could be?
> I have played around with the slack on the cable, but that did
> nothing.
>
>
> --
> dean
> ------------------------------------------------------------------------
> Posted via RealCarAudio.com - The checkmate of the car audio community.
> http://www.realcaraudio.com
> dean's Profile:
http://www.realcaraudio.com/forums/m...fo&userid=1624
> View this thread:
http://www.realcaraudio.com/forums/s...?threadid=9076
> maybe a bad motor mount
09-22-2003, 11:28 PM
#6
Guest
Posts: n/a
Re: sticky gas pedal on 88 CRX si
"dean" <dean.u67km@realcaraudio.com> wrote in message
news:dean.u67km@realcaraudio.com...
>
> I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
> be sticky with the engine shut off or when it is idling. Only when the
> car is in gear. Can anyone give me any idea what the problem could be?
> I have played around with the slack on the cable, but that did
> nothing.
>
>
> --
> dean
> ------------------------------------------------------------------------
> Posted via RealCarAudio.com - The checkmate of the car audio community.
> http://www.realcaraudio.com
> dean's Profile:
http://www.realcaraudio.com/forums/m...fo&userid=1624
> View this thread:
http://www.realcaraudio.com/forums/s...?threadid=9076
> maybe a bad motor mount
09-22-2003, 11:28 PM
#7
Guest
Posts: n/a
Re: sticky gas pedal on 88 CRX si
"dean" <dean.u67km@realcaraudio.com> wrote in message
news:dean.u67km@realcaraudio.com...
>
> I have a sticky gas pedal on my standard '88 CRX si. It doesn't seem to
> be sticky with the engine shut off or when it is idling. Only when the
> car is in gear. Can anyone give me any idea what the problem could be?
> I have played around with the slack on the cable, but that did
> nothing.
>
>
> --
> dean
> ------------------------------------------------------------------------
> Posted via RealCarAudio.com - The checkmate of the car audio community.
> http://www.realcaraudio.com
> dean's Profile:
http://www.realcaraudio.com/forums/m...fo&userid=1624
> View this thread:
http://www.realcaraudio.com/forums/s...?threadid=9076
> maybe a bad motor mount
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
