Valve Cover Torque
Guest
Posts: n/a
Re: Valve Cover Torque
"Redwood" <mhollandsprint@earthlink.net> wrote in message
news:4szmb.2301$RQ1.5@newsread3.news.pas.earthlink .net...
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the
spec
> for the four nuts holding down the cover.
>
> Thanks
10N-m, or 7.2 ft.lb
Guest
Posts: n/a
Re: Valve Cover Torque
"Redwood" <mhollandsprint@earthlink.net> wrote in message
news:4szmb.2301$RQ1.5@newsread3.news.pas.earthlink .net...
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the
spec
> for the four nuts holding down the cover.
>
> Thanks
10N-m, or 7.2 ft.lb
Guest
Posts: n/a
Re: Valve Cover Torque
"Redwood" <mhollandsprint@earthlink.net> wrote in message
news:4szmb.2301$RQ1.5@newsread3.news.pas.earthlink .net...
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the
spec
> for the four nuts holding down the cover.
>
> Thanks
10N-m, or 7.2 ft.lb
Guest
Posts: n/a
Re: Valve Cover Torque
"Redwood" <mhollandsprint@earthlink.net> wrote in message
news:4szmb.2301$RQ1.5@newsread3.news.pas.earthlink .net...
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the
spec
> for the four nuts holding down the cover.
>
> Thanks
10N-m, or 7.2 ft.lb
Guest
Posts: n/a
Re: Valve Cover Torque
Redwood wrote:
>
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
> for the four nuts holding down the cover.
>
> Thanks
-----------
On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
you tighten the nuts until they stop, as I recall, because there's
shoulders below the threads. It all fits so precisely there's no
torqueing or re-torqueing involved.
'Curly'
--------------
>
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
> for the four nuts holding down the cover.
>
> Thanks
-----------
On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
you tighten the nuts until they stop, as I recall, because there's
shoulders below the threads. It all fits so precisely there's no
torqueing or re-torqueing involved.
'Curly'
--------------
Guest
Posts: n/a
Re: Valve Cover Torque
Redwood wrote:
>
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
> for the four nuts holding down the cover.
>
> Thanks
-----------
On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
you tighten the nuts until they stop, as I recall, because there's
shoulders below the threads. It all fits so precisely there's no
torqueing or re-torqueing involved.
'Curly'
--------------
>
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
> for the four nuts holding down the cover.
>
> Thanks
-----------
On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
you tighten the nuts until they stop, as I recall, because there's
shoulders below the threads. It all fits so precisely there's no
torqueing or re-torqueing involved.
'Curly'
--------------
Guest
Posts: n/a
Re: Valve Cover Torque
Redwood wrote:
>
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
> for the four nuts holding down the cover.
>
> Thanks
-----------
On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
you tighten the nuts until they stop, as I recall, because there's
shoulders below the threads. It all fits so precisely there's no
torqueing or re-torqueing involved.
'Curly'
--------------
>
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
> for the four nuts holding down the cover.
>
> Thanks
-----------
On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
you tighten the nuts until they stop, as I recall, because there's
shoulders below the threads. It all fits so precisely there's no
torqueing or re-torqueing involved.
'Curly'
--------------
Guest
Posts: n/a
Re: Valve Cover Torque
Redwood wrote:
>
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
> for the four nuts holding down the cover.
>
> Thanks
-----------
On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
you tighten the nuts until they stop, as I recall, because there's
shoulders below the threads. It all fits so precisely there's no
torqueing or re-torqueing involved.
'Curly'
--------------
>
> The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
> for the four nuts holding down the cover.
>
> Thanks
-----------
On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
you tighten the nuts until they stop, as I recall, because there's
shoulders below the threads. It all fits so precisely there's no
torqueing or re-torqueing involved.
'Curly'
--------------
Thread
Thread Starter
Forum
Replies
Last Post
wilsonchen
Car Parts For Sale
0
May 20, 2014 04:37 PM
Eg_TypeR
Car Parts For Sale
1
Feb 19, 2007 09:02 PM
mykeymykey01@yahoo.com
Hyundai Mailing List
1
Feb 3, 2007 09:55 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
