wheel studs
08-20-2004, 09:31 PM
#2
Guest
Posts: n/a
Re: wheel studs
Some studs are pressed out backward.
"M&D" <debmar@eglr.net> wrote in message
news:10iajfe1vbtkf62@corp.supernews.com...
> I need to replace 2 broken front wheel studs on an 89 Prelude SI.What is
the
> correct way to remove the broken ones?....
>
>
"M&D" <debmar@eglr.net> wrote in message
news:10iajfe1vbtkf62@corp.supernews.com...
> I need to replace 2 broken front wheel studs on an 89 Prelude SI.What is
the
> correct way to remove the broken ones?....
>
>
08-20-2004, 09:31 PM
#3
Guest
Posts: n/a
Re: wheel studs
Some studs are pressed out backward.
"M&D" <debmar@eglr.net> wrote in message
news:10iajfe1vbtkf62@corp.supernews.com...
> I need to replace 2 broken front wheel studs on an 89 Prelude SI.What is
the
> correct way to remove the broken ones?....
>
>
"M&D" <debmar@eglr.net> wrote in message
news:10iajfe1vbtkf62@corp.supernews.com...
> I need to replace 2 broken front wheel studs on an 89 Prelude SI.What is
the
> correct way to remove the broken ones?....
>
>
08-21-2004, 05:55 AM
#4
Guest
Posts: n/a
Re: wheel studs
Ok...so how do you get the new ones in?....It appears that I will have to
separate the hub,...maybe remove the axle?...
"Dave M." <gadget007@rochester.rr.com> wrote in message
news:HBxVc.35108$Kt5.26610@twister.nyroc.rr.com...
> Some studs are pressed out backward.
>
>
> "M&D" <debmar@eglr.net> wrote in message
> news:10iajfe1vbtkf62@corp.supernews.com...
> > I need to replace 2 broken front wheel studs on an 89 Prelude SI.What is
> the
> > correct way to remove the broken ones?....
> >
> >
>
>
separate the hub,...maybe remove the axle?...
"Dave M." <gadget007@rochester.rr.com> wrote in message
news:HBxVc.35108$Kt5.26610@twister.nyroc.rr.com...
> Some studs are pressed out backward.
>
>
> "M&D" <debmar@eglr.net> wrote in message
> news:10iajfe1vbtkf62@corp.supernews.com...
> > I need to replace 2 broken front wheel studs on an 89 Prelude SI.What is
> the
> > correct way to remove the broken ones?....
> >
> >
>
>
08-21-2004, 05:55 AM
#5
Guest
Posts: n/a
Re: wheel studs
Ok...so how do you get the new ones in?....It appears that I will have to
separate the hub,...maybe remove the axle?...
"Dave M." <gadget007@rochester.rr.com> wrote in message
news:HBxVc.35108$Kt5.26610@twister.nyroc.rr.com...
> Some studs are pressed out backward.
>
>
> "M&D" <debmar@eglr.net> wrote in message
> news:10iajfe1vbtkf62@corp.supernews.com...
> > I need to replace 2 broken front wheel studs on an 89 Prelude SI.What is
> the
> > correct way to remove the broken ones?....
> >
> >
>
>
separate the hub,...maybe remove the axle?...
"Dave M." <gadget007@rochester.rr.com> wrote in message
news:HBxVc.35108$Kt5.26610@twister.nyroc.rr.com...
> Some studs are pressed out backward.
>
>
> "M&D" <debmar@eglr.net> wrote in message
> news:10iajfe1vbtkf62@corp.supernews.com...
> > I need to replace 2 broken front wheel studs on an 89 Prelude SI.What is
> the
> > correct way to remove the broken ones?....
> >
> >
>
>
08-23-2004, 05:23 PM
#6
Guest
Posts: n/a
Re: wheel studs
Although I haven't done it on a honda, this is how I pressed in a stud
on another car.
Put stud in place, put a bunch of washers on the lug nut side, put on
the lug nut, then tightened until it pressed into place.
Getting the stud out was a pain, I used a couple of clamps and a steel
bar - certainly the wrong tool but better than beating on it with a
hammer and damaging other parts.
on another car.
Put stud in place, put a bunch of washers on the lug nut side, put on
the lug nut, then tightened until it pressed into place.
Getting the stud out was a pain, I used a couple of clamps and a steel
bar - certainly the wrong tool but better than beating on it with a
hammer and damaging other parts.
08-23-2004, 05:23 PM
#7
Guest
Posts: n/a
Re: wheel studs
Although I haven't done it on a honda, this is how I pressed in a stud
on another car.
Put stud in place, put a bunch of washers on the lug nut side, put on
the lug nut, then tightened until it pressed into place.
Getting the stud out was a pain, I used a couple of clamps and a steel
bar - certainly the wrong tool but better than beating on it with a
hammer and damaging other parts.
on another car.
Put stud in place, put a bunch of washers on the lug nut side, put on
the lug nut, then tightened until it pressed into place.
Getting the stud out was a pain, I used a couple of clamps and a steel
bar - certainly the wrong tool but better than beating on it with a
hammer and damaging other parts.
Thread
Thread Starter
Forum
Replies
Last Post
MiamiRafael
Hyundai Mailing List
1
09-03-2004 06:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)