Any tricks to programming Homelink on 2007 Sante Fe?
02-15-2008, 04:15 PM
#1
Guest
Posts: n/a
Any tricks to programming Homelink on 2007 Sante Fe?
I've just installed a new opener and trying to follow the instructions
in the car's manual and the homelink.com site and I cannot get it to
work.
It seems simple enough but has anyone run across any "tricks". I feel
stupid.
Any suggestions?
Thanks
in the car's manual and the homelink.com site and I cannot get it to
work.
It seems simple enough but has anyone run across any "tricks". I feel
stupid.
Any suggestions?
Thanks
02-15-2008, 05:18 PM
#2
Guest
Posts: n/a
Re: Any tricks to programming Homelink on 2007 Sante Fe?
I don't remember the details of programming mine, but I was left with the
impressionable knowledge that if I ever had to do it again, I would follow
the steps, EXACTLY, from beginning to end. I now have two of them working.
Be sure to note which type of opener you have, rolling or static.
Goood Luck
Jim
<bobm3@worthless.info> wrote in message
news:h40cr396je0d6muee1qt9796u9llu35mal@4ax.com...
> I've just installed a new opener and trying to follow the instructions
> in the car's manual and the homelink.com site and I cannot get it to
> work.
>
> It seems simple enough but has anyone run across any "tricks". I feel
> stupid.
>
> Any suggestions?
>
> Thanks
impressionable knowledge that if I ever had to do it again, I would follow
the steps, EXACTLY, from beginning to end. I now have two of them working.
Be sure to note which type of opener you have, rolling or static.
Goood Luck
Jim
<bobm3@worthless.info> wrote in message
news:h40cr396je0d6muee1qt9796u9llu35mal@4ax.com...
> I've just installed a new opener and trying to follow the instructions
> in the car's manual and the homelink.com site and I cannot get it to
> work.
>
> It seems simple enough but has anyone run across any "tricks". I feel
> stupid.
>
> Any suggestions?
>
> Thanks
02-15-2008, 05:37 PM
#3
Guest
Posts: n/a
Re: Any tricks to programming Homelink on 2007 Sante Fe?
I'm there with you I tried to program my Sonata FOREVER reading and re-
reading the manual and visited homelink watching the video and all.
NOTHING worked. So I jumped on hmaservice.com and hey what do you
know? A TSB on the subject! Bottom line was I needed to have the key
in the "ON" position NOT the "Acc" position. Followed all the other
steps with this change and it worked like a charm!
Paul
reading the manual and visited homelink watching the video and all.
NOTHING worked. So I jumped on hmaservice.com and hey what do you
know? A TSB on the subject! Bottom line was I needed to have the key
in the "ON" position NOT the "Acc" position. Followed all the other
steps with this change and it worked like a charm!
Paul
02-16-2008, 12:41 PM
#4
Guest
Posts: n/a
Re: Any tricks to programming Homelink on 2007 Sante Fe?
On Fri, 15 Feb 2008 14:37:47 -0800 (PST), paulgyro@gmail.com wrote:
>I'm there with you I tried to program my Sonata FOREVER reading and re-
>reading the manual and visited homelink watching the video and all.
>NOTHING worked. So I jumped on hmaservice.com and hey what do you
>know? A TSB on the subject! Bottom line was I needed to have the key
>in the "ON" position NOT the "Acc" position. Followed all the other
>steps with this change and it worked like a charm!
>
>
>
>Paul
Finally got it to work...
1) needed key in ON position (not ACC as mentioned above)
2) needed to wait until led flashed RAPIDLY which took almost 1
minute. But following that it started working...
Thanks
>I'm there with you I tried to program my Sonata FOREVER reading and re-
>reading the manual and visited homelink watching the video and all.
>NOTHING worked. So I jumped on hmaservice.com and hey what do you
>know? A TSB on the subject! Bottom line was I needed to have the key
>in the "ON" position NOT the "Acc" position. Followed all the other
>steps with this change and it worked like a charm!
>
>
>
>Paul
Finally got it to work...
1) needed key in ON position (not ACC as mentioned above)
2) needed to wait until led flashed RAPIDLY which took almost 1
minute. But following that it started working...
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
:\
Honda Mailing List
2
10-19-2007 11:06 AM
:\
Honda Mailing List
0
10-19-2007 12:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)