I have 14 inch alloy wheels on my 2001 Accent and in need of OEM steel
wheels for new winter tires. My dealer tells me I need 14x5J wheels.

Can I use these from a Saturn on my Accent?

Bolt pattern: 4x100
Wheel dimensions: 14" x 5" (14"x6" outside dimensions)
Offset: 50mm
Centrebore: 57.1mm

 

While I don't have personal experience with this modification, there
have been quite a few postings to this group regarding such:

I used the 15" Saturn wheel that I got from the salvage yard
for $15/wheel. All of the 15" Saturn wheels are the same. They have
exactly the same bolt pattern as the Accent (4 x 100mm) and offset
(45). You will have to drill 2 - 3/8" holes in the wheels to clear
the phillips head screws that stick out of the Accent's front wheel
hubs.
-McMahon (baadmoon@flash.net)

195X50 15" Fuldas on steel Saturn rims. I've got over 40K miles on
mine and they still look like new.
-screwtape iii (gfy@bkbusa.com)

Go to www.tirerack.com, they have explanations of wheel width, offset,
plus-sizing, etc.

Great "Tire/Wheel Size Calculator" at
www.1010.com .
Additional postings may be accessed by searching for "Accent
wheels tires" within group (top of page.)
-Patrick

 

larvato@msn.com (Patrick) wrote:

> I used the 15" Saturn wheel that I got from the salvage yard
>for $15/wheel. All of the 15" Saturn wheels are the same. They have
>exactly the same bolt pattern as the Accent (4 x 100mm) and offset
>(45). You will have to drill 2 - 3/8" holes in the wheels to clear
>the phillips head screws that stick out of the Accent's front wheel
>hubs.
>-McMahon (baadmoon@flash.net)

Actually, you can take those screws out. They're used to hold the hub
and rotor together during the assembly process and are unnecessary
once you have a wheel bolted on.

David Thompson

The rain came down in torrents, the wind increased to a stiff breeze
and some of the juniors, not accustomed to be rocked in the cradle
of the deep, were forced to "Cast their bread upon the waters."