After using Bosch oil filters for the first 30,000 miles on my 06 Sonata, I
just switched to Hyundai filters because my dealer had them at a reasonable
$5 each. One problem - I noticed that the diameter of the filter doesn't
fit any of my filter wrenches/sockets (what ever you want to call them). I
envision this to be a problem when I go to take it off next time. Please
don't tell me you need a special Hyundai part #1243414311 to remove the
filter. Because it's up inside the bottom windage tray that is bolted on
with a dozen bolts, I don't think I can get one of my old style strap
wrenches around it. What do others use? I thought I had every size
wrench/socket they make.

Tom

 

I have a three-fingered 3/8" square drive wrench I purchased at Sears.
Craftsman #47064. It'll grab almost any filter.

--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html

 

Thanks, I'll have to look for that one. Does it close up like a three jawed
chuck? Now I can use my Sears gift cards that I'm bound to get for
Christmas. )


"hyundaitech" <notpublic@not.public.com> wrote in message
news:6a6a0b64cae1523ee4765aaf986aaaa5@localhost.ta lkaboutautos.com...
>I have a three-fingered 3/8" square drive wrench I purchased at Sears.
> Craftsman #47064. It'll grab almost any filter.
>
> --
> Message posted using
> http://www.talkaboutautos.com/group/alt.autos.hyundai/
> More information at http://www.talkaboutautos.com/faq.html
>

 

Tom wrote:
> After using Bosch oil filters for the first 30,000 miles on my 06 Sonata, I
> just switched to Hyundai filters because my dealer had them at a reasonable
> $5 each. One problem - I noticed that the diameter of the filter doesn't
> fit any of my filter wrenches/sockets (what ever you want to call them). I
> envision this to be a problem when I go to take it off next time. Please
> don't tell me you need a special Hyundai part #1243414311 to remove the
> filter. Because it's up inside the bottom windage tray that is bolted on
> with a dozen bolts, I don't think I can get one of my old style strap
> wrenches around it. What do others use? I thought I had every size
> wrench/socket they make.

I bought a wrench that has three fingers that will adjust to almost any
size spin-on filter. I stick it on a 3/8" drive extension and it is
easy to loosen the filter.

Matt

 

I used my hand, it should never be tighter than hand tight.




"hyundaitech" <notpublic@not.public.com> wrote in message
news:6a6a0b64cae1523ee4765aaf986aaaa5@localhost.ta lkaboutautos.com...
>I have a three-fingered 3/8" square drive wrench I purchased at Sears.
> Craftsman #47064. It'll grab almost any filter.
>
> --
> Message posted using
> http://www.talkaboutautos.com/group/alt.autos.hyundai/
> More information at http://www.talkaboutautos.com/faq.html
>

 

It's not quite the same, but the principle is similar. There are three
arms that close together when the center fixture is turned. It reverses,
too, but I wouldn't recommend using this (or, typically any) wrench to
tighten filters. The fingers tend to dimple the oil filter and could
cause a leak.

--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html

 

Do I answer this one???? OK

Yes, you never put ON a filter more than hand tight. Getting it off can
quite often require much more torque. Plus the filter in question is
sequestered up inside of a cavity where you really can't twist very well.


"&*^%$" <*&^%#@spamtrap.ca> wrote in message
news:142bb$4757ff61$4c0a8006$18808@TEKSAVVY.COM...
>I used my hand, it should never be tighter than hand tight.
>
>
>
>
> "hyundaitech" <notpublic@not.public.com> wrote in message
> news:6a6a0b64cae1523ee4765aaf986aaaa5@localhost.ta lkaboutautos.com...
>>I have a three-fingered 3/8" square drive wrench I purchased at Sears.
>> Craftsman #47064. It'll grab almost any filter.
>>
>> --
>> Message posted using
>> http://www.talkaboutautos.com/group/alt.autos.hyundai/
>> More information at http://www.talkaboutautos.com/faq.html
>>
>
>