Rear Wheel Hub Assembly
11-28-2004, 02:10 AM
#1
Guest
Posts: n/a
Rear Wheel Hub Assembly
I have a 2003 Santa Fe FWD and the rear end seems to have a "growling" sound
when turning to the left at road speeds. occasionally in straight stretches
it flares up a bit also. It Sounds like a bearing but since the car has had
repairs on that quarter due to an accident, I don't want to have the dealer
warranty the parts.
Hyundaitech, I want to replace the bearing hub assembly and the Spindle too
I would guess. Any tips or idea on the cost. I am fairly good at most
repairs so the prospect does not bother me.
Thanks in advance
when turning to the left at road speeds. occasionally in straight stretches
it flares up a bit also. It Sounds like a bearing but since the car has had
repairs on that quarter due to an accident, I don't want to have the dealer
warranty the parts.
Hyundaitech, I want to replace the bearing hub assembly and the Spindle too
I would guess. Any tips or idea on the cost. I am fairly good at most
repairs so the prospect does not bother me.
Thanks in advance
11-28-2004, 04:26 PM
#2
Guest
Posts: n/a
Re: Rear Wheel Hub Assembly
"John Doe" <azNO4lifeSPAM@***.net> wrote in message
news:tZdqd.177693$hj.1449@fed1read07...
> I have a 2003 Santa Fe FWD and the rear end seems to have a "growling"
sound
> when turning to the left at road speeds. occasionally in straight
stretches
> it flares up a bit also. It Sounds like a bearing but since the car has
had
> repairs on that quarter due to an accident, I don't want to have the
dealer
> warranty the parts.
>
> Hyundaitech, I want to replace the bearing hub assembly and the Spindle
too
> I would guess. Any tips or idea on the cost. I am fairly good at most
> repairs so the prospect does not bother me.
> Thanks in advance
Parts & list prices may be obtained at
https://dcs.hyundaidealer.com/customer/index.jsp
Registration is free.
After logging in and clicking on the Bell&Howell picture, enter your
car's VIN for best results. Add items you're interested in to the
shopping cart, and when you're done, select a dealer near you
and view your shopping cart from the original login window. The
cart will have suggested list prices for all selected parts.
Bob
11-28-2004, 06:34 PM
#3
Guest
Posts: n/a
Re: Rear Wheel Hub Assembly
I've never done this on a Santa Fe, but I would imagine the hub/bearing
assembly just unbolts and comes right off. The spindle may be a different
issue. It may be part of the rear suspension member. If you want to check
whether this is actually the noise, lift the rear wheel in question off the
ground, get under the car, and have a helper spin the wheel. If you put a
long screwdriver from the back of the spindle area to your ear, you can
probably hear the bearing if it's noisy. You could do the same on the
other side if you wanted to compare noise levels. I just did one on a
Sonata that was on the side of the car opposite from where I thought it
was coming from. I managed to get it right by listening like I mentioned
above.
assembly just unbolts and comes right off. The spindle may be a different
issue. It may be part of the rear suspension member. If you want to check
whether this is actually the noise, lift the rear wheel in question off the
ground, get under the car, and have a helper spin the wheel. If you put a
long screwdriver from the back of the spindle area to your ear, you can
probably hear the bearing if it's noisy. You could do the same on the
other side if you wanted to compare noise levels. I just did one on a
Sonata that was on the side of the car opposite from where I thought it
was coming from. I managed to get it right by listening like I mentioned
above.
11-28-2004, 07:54 PM
#4
Guest
Posts: n/a
Re: Rear Wheel Hub Assembly
Thanks for the info. I went through the steps but the items will not add to
the shopping cart. Although it looks a little clearer, I am Still stuck.
As I was looking for advice on the R&R I will hope others pass by with
advice as well.
"Bob Bailin" <72027.3605@compuserve.com> wrote in message
news:codfok$a01$1@ngspool-d02.news.aol.com...
>
> "John Doe" <azNO4lifeSPAM@***.net> wrote in message
> news:tZdqd.177693$hj.1449@fed1read07...
> > I have a 2003 Santa Fe FWD and the rear end seems to have a "growling"
> sound
> > when turning to the left at road speeds. occasionally in straight
> stretches
> > it flares up a bit also. It Sounds like a bearing but since the car has
> had
> > repairs on that quarter due to an accident, I don't want to have the
> dealer
> > warranty the parts.
> >
> > Hyundaitech, I want to replace the bearing hub assembly and the Spindle
> too
> > I would guess. Any tips or idea on the cost. I am fairly good at most
> > repairs so the prospect does not bother me.
> > Thanks in advance
>
> Parts & list prices may be obtained at
> https://dcs.hyundaidealer.com/customer/index.jsp
> Registration is free.
>
> After logging in and clicking on the Bell&Howell picture, enter your
> car's VIN for best results. Add items you're interested in to the
> shopping cart, and when you're done, select a dealer near you
> and view your shopping cart from the original login window. The
> cart will have suggested list prices for all selected parts.
>
> Bob
>
>
the shopping cart. Although it looks a little clearer, I am Still stuck.
As I was looking for advice on the R&R I will hope others pass by with
advice as well.
"Bob Bailin" <72027.3605@compuserve.com> wrote in message
news:codfok$a01$1@ngspool-d02.news.aol.com...
>
> "John Doe" <azNO4lifeSPAM@***.net> wrote in message
> news:tZdqd.177693$hj.1449@fed1read07...
> > I have a 2003 Santa Fe FWD and the rear end seems to have a "growling"
> sound
> > when turning to the left at road speeds. occasionally in straight
> stretches
> > it flares up a bit also. It Sounds like a bearing but since the car has
> had
> > repairs on that quarter due to an accident, I don't want to have the
> dealer
> > warranty the parts.
> >
> > Hyundaitech, I want to replace the bearing hub assembly and the Spindle
> too
> > I would guess. Any tips or idea on the cost. I am fairly good at most
> > repairs so the prospect does not bother me.
> > Thanks in advance
>
> Parts & list prices may be obtained at
> https://dcs.hyundaidealer.com/customer/index.jsp
> Registration is free.
>
> After logging in and clicking on the Bell&Howell picture, enter your
> car's VIN for best results. Add items you're interested in to the
> shopping cart, and when you're done, select a dealer near you
> and view your shopping cart from the original login window. The
> cart will have suggested list prices for all selected parts.
>
> Bob
>
>
11-29-2004, 12:21 AM
#5
Guest
Posts: n/a
Re: Rear Wheel Hub Assembly
Make sure you allow cookies & popup windows for this site.
Check the items you want to buy, click on the Add to Cart
button at the top of the page. A confirming window will popup.
You may have to select a default dealership entry first for
the shopping cart.
Bob
"John Doe" <azNO4lifeSPAM@***.net> wrote in message
news:mztqd.178802$hj.144736@fed1read07...
> Thanks for the info. I went through the steps but the items will not add
to
> the shopping cart. Although it looks a little clearer, I am Still stuck.
> As I was looking for advice on the R&R I will hope others pass by with
> advice as well.
>
>
> "Bob Bailin" <72027.3605@compuserve.com> wrote in message
> news:codfok$a01$1@ngspool-d02.news.aol.com...
> >
> > "John Doe" <azNO4lifeSPAM@***.net> wrote in message
> > news:tZdqd.177693$hj.1449@fed1read07...
> > > I have a 2003 Santa Fe FWD and the rear end seems to have a "growling"
> > sound
> > > when turning to the left at road speeds. occasionally in straight
> > stretches
> > > it flares up a bit also. It Sounds like a bearing but since the car
has
> > had
> > > repairs on that quarter due to an accident, I don't want to have the
> > dealer
> > > warranty the parts.
> > >
> > > Hyundaitech, I want to replace the bearing hub assembly and the
Spindle
> > too
> > > I would guess. Any tips or idea on the cost. I am fairly good at most
> > > repairs so the prospect does not bother me.
> > > Thanks in advance
> >
> > Parts & list prices may be obtained at
> > https://dcs.hyundaidealer.com/customer/index.jsp
> > Registration is free.
> >
> > After logging in and clicking on the Bell&Howell picture, enter your
> > car's VIN for best results. Add items you're interested in to the
> > shopping cart, and when you're done, select a dealer near you
> > and view your shopping cart from the original login window. The
> > cart will have suggested list prices for all selected parts.
> >
> > Bob
> >
> >
>
>
Check the items you want to buy, click on the Add to Cart
button at the top of the page. A confirming window will popup.
You may have to select a default dealership entry first for
the shopping cart.
Bob
"John Doe" <azNO4lifeSPAM@***.net> wrote in message
news:mztqd.178802$hj.144736@fed1read07...
> Thanks for the info. I went through the steps but the items will not add
to
> the shopping cart. Although it looks a little clearer, I am Still stuck.
> As I was looking for advice on the R&R I will hope others pass by with
> advice as well.
>
>
> "Bob Bailin" <72027.3605@compuserve.com> wrote in message
> news:codfok$a01$1@ngspool-d02.news.aol.com...
> >
> > "John Doe" <azNO4lifeSPAM@***.net> wrote in message
> > news:tZdqd.177693$hj.1449@fed1read07...
> > > I have a 2003 Santa Fe FWD and the rear end seems to have a "growling"
> > sound
> > > when turning to the left at road speeds. occasionally in straight
> > stretches
> > > it flares up a bit also. It Sounds like a bearing but since the car
has
> > had
> > > repairs on that quarter due to an accident, I don't want to have the
> > dealer
> > > warranty the parts.
> > >
> > > Hyundaitech, I want to replace the bearing hub assembly and the
Spindle
> > too
> > > I would guess. Any tips or idea on the cost. I am fairly good at most
> > > repairs so the prospect does not bother me.
> > > Thanks in advance
> >
> > Parts & list prices may be obtained at
> > https://dcs.hyundaidealer.com/customer/index.jsp
> > Registration is free.
> >
> > After logging in and clicking on the Bell&Howell picture, enter your
> > car's VIN for best results. Add items you're interested in to the
> > shopping cart, and when you're done, select a dealer near you
> > and view your shopping cart from the original login window. The
> > cart will have suggested list prices for all selected parts.
> >
> > Bob
> >
> >
>
>
11-29-2004, 01:41 AM
#6
Guest
Posts: n/a
Re: Rear Wheel Hub Assembly
Bob
Interesting, I have no (add to Cart) button on the page top. I will turn off
my pop-up blocker and try again.
Hyundaitech
Thanks for the advice. It looks pretty basic on the webtech site. The
exploded view is easy to read and I just wanted to get an idea on any tricks
or tips.
With the noise being more apparent under load, (with the vehicle weight
pushing outward) The right side is my guess, and other riders in the car
seem to feel it on that side also. I will try the mechanics stethescope I
have in my tool box and compare the 2 wheels. I Have not needed it for many
years, but that is why I kept it.
Thanks again, Let me know if you think of anything else.
"Bob Bailin" <72027.3605@compuserve.com> wrote in message
news:coebht$qfs$1@ngspool-d02.news.aol.com...
> Make sure you allow cookies & popup windows for this site.
> Check the items you want to buy, click on the Add to Cart
> button at the top of the page. A confirming window will popup.
> You may have to select a default dealership entry first for
> the shopping cart.
>
> Bob
>
> "John Doe" <azNO4lifeSPAM@***.net> wrote in message
> news:mztqd.178802$hj.144736@fed1read07...
> > Thanks for the info. I went through the steps but the items will not add
> to
> > the shopping cart. Although it looks a little clearer, I am Still stuck.
> > As I was looking for advice on the R&R I will hope others pass by with
> > advice as well.
> >
> >
> > "Bob Bailin" <72027.3605@compuserve.com> wrote in message
> > news:codfok$a01$1@ngspool-d02.news.aol.com...
> > >
> > > "John Doe" <azNO4lifeSPAM@***.net> wrote in message
> > > news:tZdqd.177693$hj.1449@fed1read07...
> > > > I have a 2003 Santa Fe FWD and the rear end seems to have a
"growling"
> > > sound
> > > > when turning to the left at road speeds. occasionally in straight
> > > stretches
> > > > it flares up a bit also. It Sounds like a bearing but since the car
> has
> > > had
> > > > repairs on that quarter due to an accident, I don't want to have the
> > > dealer
> > > > warranty the parts.
> > > >
> > > > Hyundaitech, I want to replace the bearing hub assembly and the
> Spindle
> > > too
> > > > I would guess. Any tips or idea on the cost. I am fairly good at
most
> > > > repairs so the prospect does not bother me.
> > > > Thanks in advance
> > >
> > > Parts & list prices may be obtained at
> > > https://dcs.hyundaidealer.com/customer/index.jsp
> > > Registration is free.
> > >
> > > After logging in and clicking on the Bell&Howell picture, enter your
> > > car's VIN for best results. Add items you're interested in to the
> > > shopping cart, and when you're done, select a dealer near you
> > > and view your shopping cart from the original login window. The
> > > cart will have suggested list prices for all selected parts.
> > >
> > > Bob
> > >
> > >
> >
> >
>
>
Interesting, I have no (add to Cart) button on the page top. I will turn off
my pop-up blocker and try again.
Hyundaitech
Thanks for the advice. It looks pretty basic on the webtech site. The
exploded view is easy to read and I just wanted to get an idea on any tricks
or tips.
With the noise being more apparent under load, (with the vehicle weight
pushing outward) The right side is my guess, and other riders in the car
seem to feel it on that side also. I will try the mechanics stethescope I
have in my tool box and compare the 2 wheels. I Have not needed it for many
years, but that is why I kept it.
Thanks again, Let me know if you think of anything else.
"Bob Bailin" <72027.3605@compuserve.com> wrote in message
news:coebht$qfs$1@ngspool-d02.news.aol.com...
> Make sure you allow cookies & popup windows for this site.
> Check the items you want to buy, click on the Add to Cart
> button at the top of the page. A confirming window will popup.
> You may have to select a default dealership entry first for
> the shopping cart.
>
> Bob
>
> "John Doe" <azNO4lifeSPAM@***.net> wrote in message
> news:mztqd.178802$hj.144736@fed1read07...
> > Thanks for the info. I went through the steps but the items will not add
> to
> > the shopping cart. Although it looks a little clearer, I am Still stuck.
> > As I was looking for advice on the R&R I will hope others pass by with
> > advice as well.
> >
> >
> > "Bob Bailin" <72027.3605@compuserve.com> wrote in message
> > news:codfok$a01$1@ngspool-d02.news.aol.com...
> > >
> > > "John Doe" <azNO4lifeSPAM@***.net> wrote in message
> > > news:tZdqd.177693$hj.1449@fed1read07...
> > > > I have a 2003 Santa Fe FWD and the rear end seems to have a
"growling"
> > > sound
> > > > when turning to the left at road speeds. occasionally in straight
> > > stretches
> > > > it flares up a bit also. It Sounds like a bearing but since the car
> has
> > > had
> > > > repairs on that quarter due to an accident, I don't want to have the
> > > dealer
> > > > warranty the parts.
> > > >
> > > > Hyundaitech, I want to replace the bearing hub assembly and the
> Spindle
> > > too
> > > > I would guess. Any tips or idea on the cost. I am fairly good at
most
> > > > repairs so the prospect does not bother me.
> > > > Thanks in advance
> > >
> > > Parts & list prices may be obtained at
> > > https://dcs.hyundaidealer.com/customer/index.jsp
> > > Registration is free.
> > >
> > > After logging in and clicking on the Bell&Howell picture, enter your
> > > car's VIN for best results. Add items you're interested in to the
> > > shopping cart, and when you're done, select a dealer near you
> > > and view your shopping cart from the original login window. The
> > > cart will have suggested list prices for all selected parts.
> > >
> > > Bob
> > >
> > >
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
dannyboghian69
Honda Accord
1
03-16-2008 11:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
