Seadog

Has anyone replaced a tail lamp bulb on a Elantra? I assume you get access
from the trunk. I removed the two screws to remove the formed cover. And the
3 nuts that hold on the lamp housing assembly. The fourth is covered in
rubber. I can not get the rubber cover off easily. I do not want to damage.
I'm I on the right track? How are the bulbs replaced?








/

CincyPSU

> Elantra
>From: "Seadog" seadog17@yahoo.com
>Date: 8/14/2004 6:41 PM Eastern Standard Time
>Message-id: <vywTc.205$Kf4.112@nwrddc02.gnilink.net>
>
>Has anyone replaced a tail lamp bulb on a Elantra? I assume you get access
>from the trunk. I removed the two screws to remove the formed cover. And the
>3 nuts that hold on the lamp housing assembly. The fourth is covered in
>rubber. I can not get the rubber cover off easily. I do not want to damage.
>I'm I on the right track? How are the bulbs replaced?
>
>
>
>
>
>
>
>
>/
>
>
>
>
>
>
>
>

Do what I did when I ran to serious problems changing the driver's side
headlight bulb. Bring it to your dealer, covered by bumper-to-bumper warranty.


J.M.

hyundaitech

The brake bulb is not covered by the bumper to bumper, it's 1 year 12k
miles only. The original poster is on the right track. There's a metal
pin which engages into the plastic cover you see. Take a small hammer,
3/8" drive ratchet head, or something similarly heavy and give a good
whack to the plastic cover inside the trunk to give the lamp assembly a
little help out toward the rear of the car. It should come out straight
backward.