Type Engine
Guest
Posts: n/a
Re: Type Engine
junkman2 wrote:
> Dose any one know what a Interference Engine is.When I look up parts for a
> 4 cyl.Santa fe Eng.I get that question.Thanks
An interference engine is one in which the valves, when at their maximum
open position, protrude into the cylinders to the point that the pistons
could hit them, IF the pistons were at top-dead-center at the same time.
The timing of the valves is such that this never occurs during normal
operation. However, it can occur if the timing belt breaks, slips or
loses enough teeth to throw the valve timing out. It can also occur if
the timing belt is replaced incorrectly (with the valve out of time) or
possibly in the case of a broken valve spring that doesn't close its
valve quickly enough.
> Dose any one know what a Interference Engine is.When I look up parts for a
> 4 cyl.Santa fe Eng.I get that question.Thanks
An interference engine is one in which the valves, when at their maximum
open position, protrude into the cylinders to the point that the pistons
could hit them, IF the pistons were at top-dead-center at the same time.
The timing of the valves is such that this never occurs during normal
operation. However, it can occur if the timing belt breaks, slips or
loses enough teeth to throw the valve timing out. It can also occur if
the timing belt is replaced incorrectly (with the valve out of time) or
possibly in the case of a broken valve spring that doesn't close its
valve quickly enough.
Thread
Thread Starter
Forum
Replies
Last Post
honda video
Honda Videos
0
Jan 30, 2008 07:28 PM
javi_oso3
honda / acura
1
Nov 13, 2007 01:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
