View Poll Results: Engine Mod or Swap?
Turbo that KA!
15
39.47%
Swap for a RB20DET
6
15.79%
Swap for a SR20DET
17
44.74%
Swap for a CA18DET
0
0%
Voters: 38. You may not vote on this poll
Turbo the KA or swap it?
#3
how much power you looking to push????? RB 20 is good but really tight squeeze, you almost literally need to shoe horn it in. sr is your best bet you can have a 400hp RELIABLE motor with that.
#4
agreed that the sr is probably the best bet. i personally like the sr because its easy to work on and aftermarket support is very good. I would definately choose a K over an sr though due to the torque outcomes.
#6
Junior GTcars Poster
iTrader: (-1)
Join Date: Mar 2006
Location: north york, toronto
Posts: 347
Rep Power: 671
remember, the KA didnt come turbo from the factory, so if you do turbo it, it will decrease the life and reliablility of the KA. But on the other hand, the SR comes turbo, and is the most reliable turbo engine out there....so SR is the best way to go...most parts available in Toronto too etc....(compared to CA and RB)
#7
Where do you get your crack from? I want IN!!
i meant realiable to a certain extent lol more reliable then others
Last edited by ribeiro953; 03-16-2007 at 11:01 AM.
#8
you would be leaning more towards the sr, but you should understand the engines boundaries so you know far you can go with each so you can reach your final goals. basically once you have a taste for speed you will want more and if the engine limits you, before having to build or something along those lines you best have made the best engine choice from the begining.