i need a cam for my z
#1
i need a cam for my z
i getting ready to take my timing chain and sprockets out and replacing them and ive made the decision to replace the cam and lifters.I dont know what type of cam i should use.I definately want a mild cam ,so if anybody here has one of can help me pick out 1 i would gladly apprieciate it. and how do i get the lifters out...since im not using them again couldnt i use pliers or somethin to pull em out?
#2
Shouldn't need pliers, they should come right out..if not, try a magnet to pull them, last resort should be the pliers. You could always sell them cheap on ebay if they are still worth anything..
#7
TPiS, Comp, and many others have some good cams, if you want mild, then don't go above .500 lift. Once you go that high you need either a really nice set of heads to make use of it or some type of forced induction to make up for it.
#8
i found one from comp cams: 210/220 .500/.510
http://store.summitracing.com/defaul...=egnsearch.asp
http://store.summitracing.com/defaul...=egnsearch.asp
#9
i would get the lt4 hotcam ... http://store.summitracing.com/partde...5&autoview=sku
#11
Originally Posted by 69z-28
yes, get the LT4 hotcam package. i have not heard an ounce of bad news about it.
#13
I think that CC 210/220 would be a little TOO mild. If you went with something that small, I think you would be very disapointed. It is probably not to far from stock. At the very least to even make it worth it I would go with a Hotcam kit or like Caleb said the CC305. You could make more power than that cam is going to give you for alot less money.
#15
yea i have to pass emissons...but i dont want to get a cam where i need to have head work to see results..i just want something that will give me a little more power....the lt4 kit is something i can get when my motor is rebuilt.