VRE 1970 Camaro 427 LS1 Project
Thread Starter
Official Sponser
Joined: Jul 2005
Posts: 32
Rep Power: 763 
VRE 1970 Camaro 427 LS1 Project
It ‘s hard to believe, but our portion of project 1970 Camaro LS1 Swap is complete. The engine will soon be off to another shop where a PTE-88 turbo will be strapped to the front. Here is a brief wrap up and specs on the project.
The Darton MID Sleeved 427 was acquired from Steve at Race Engine Development.
The customer opted to spare no expense and we installed a Callies Race Master 4.000” Forged Crankshaft, Howard Specialties 6.125” Connecting Rods, and Custom Diamond Pistons.
We had the rotating assembly, and windage tray Teflon coated by our good friends at DART Machinery.
After we received all the items back from coating we began the installation process. At this time the customer decided to go for the show car look and have the oil pan, front cover, and rear cover powder coated glossy black. As always Bill at QC Coatings was up to the job, and everything came out excellent.
We topped this stout short block with ET Performance 255cc 11 degree cylinder heads, Morel hydraulic lifters, Comp Cams Pro Magnum Rockers, and a ported Edelbrock Carb Style Manifold.
Future plans include Accufab 105mm Elbow, Wilson 105mm throttle body, and Big Stuff 3 Unit.
More pictures can be seen in our customer gallery.
The Darton MID Sleeved 427 was acquired from Steve at Race Engine Development.
The customer opted to spare no expense and we installed a Callies Race Master 4.000” Forged Crankshaft, Howard Specialties 6.125” Connecting Rods, and Custom Diamond Pistons.
We had the rotating assembly, and windage tray Teflon coated by our good friends at DART Machinery.
After we received all the items back from coating we began the installation process. At this time the customer decided to go for the show car look and have the oil pan, front cover, and rear cover powder coated glossy black. As always Bill at QC Coatings was up to the job, and everything came out excellent.
We topped this stout short block with ET Performance 255cc 11 degree cylinder heads, Morel hydraulic lifters, Comp Cams Pro Magnum Rockers, and a ported Edelbrock Carb Style Manifold.
Future plans include Accufab 105mm Elbow, Wilson 105mm throttle body, and Big Stuff 3 Unit.
More pictures can be seen in our customer gallery.
GTcars - Post God !
Joined: Feb 2003
Posts: 6,012
From: so. cali
Rep Power: 971
Wow! You know, if you guys ever wanted to use Epic as a project car for like a twin turbo with a beefy transmission just let me know. Hell even if you wanted to sponcer her, I'd be proud to were you're logo. You guys do awsome work! 
GTcars - Post God !
Joined: Nov 2003
Posts: 7,173
From: Valencia, CA
Rep Power: 967
Originally Posted by MeenZ28
sponcer
hey i can spell, sponsor me instead.
that must be one hell of a job tho, getting to do what you love and build motors with someone elses money.
GTcars - Post God !
Joined: Feb 2003
Posts: 6,012
From: so. cali
Rep Power: 971
God lay off my lack of spelling ability already. We all know i can't. It's always been my downfall. I mean come on - it's mean, not meen. Even i can poke fun at myself. Dont take it so seriously.
Thread
Thread Starter
Forum
Replies
Last Post
eric@victoryracing
Car Care / Detailing / Paint / Visual Mods
15
Jan 4, 2007 09:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
