this is what happens when im bored
#1
~~~ SITE SPONSOR ~~~
Thread Starter
Join Date: Nov 2005
Location: northwest IN
Posts: 6,374
Rep Power: 801
this is what happens when im bored
i painted my springs cleaned my shocks and panhard bar and painted my drums and rear end cover also just so i could take some pics. I also lowered it 1/2 inch in the rear by taking out the upper spring mounts and replacing them with some hose around the top of the spring. first pic is my old drums new ones are on the car.
#7
~~~ SITE SPONSOR ~~~
Thread Starter
Join Date: Nov 2005
Location: northwest IN
Posts: 6,374
Rep Power: 801
I didn't paint the springs and shocks red b/c i like how it looks black and it would just get dirty faster if it was red.(The shocks are new and were already black. THe diff cover i am going to paint red too. I only had orange paint when i did that a while back and was probly high on fumes from painting everything else in sight.
Im also painting the lower control arms black until i get some UMI red ones but i might replace all the bushings w/ red ones anyway.
I am still debating on whether or not to keep the hose on or put the mounts back in. I can tell the difference in height. I read some other forums that said the hose will be fine and not make noises or anything. Any suggestions on what else to do?
O yeah thanks for the compliments everyone. Im out of school now so hopefully more updates to come.
Im also painting the lower control arms black until i get some UMI red ones but i might replace all the bushings w/ red ones anyway.
I am still debating on whether or not to keep the hose on or put the mounts back in. I can tell the difference in height. I read some other forums that said the hose will be fine and not make noises or anything. Any suggestions on what else to do?
O yeah thanks for the compliments everyone. Im out of school now so hopefully more updates to come.
#10
~~~ SITE SPONSOR ~~~
Thread Starter
Join Date: Nov 2005
Location: northwest IN
Posts: 6,374
Rep Power: 801
i know this is an old thread but i didn't want to start a new one so just thought i would bring this one back. im looking into suspension mods again... i got a few questions.
1. is it better to get a whole new sway bar or would i be good with just new end links and cleaning up the stocker bar and painting it?
2. Do bump stops ever where out? thats the black kinda triangle shaped thing that hits the top of the rear end.
3. Since i took out the upper spring mounts which lowered the back of the car does that mess up my rear end being centered? i know an adj. panhard bar would correct that if it was a problem but if it is im going to put them back in.
any other suggestions are welcome
1. is it better to get a whole new sway bar or would i be good with just new end links and cleaning up the stocker bar and painting it?
2. Do bump stops ever where out? thats the black kinda triangle shaped thing that hits the top of the rear end.
3. Since i took out the upper spring mounts which lowered the back of the car does that mess up my rear end being centered? i know an adj. panhard bar would correct that if it was a problem but if it is im going to put them back in.
any other suggestions are welcome
#13
You dont have to get a new sway bar unless you want better handling or the holes are ovaled out.
Bump stops do wear out but just look at them. If they look worn out then they are. Like if theyre all ripped up and stuff.
Bump stops do wear out but just look at them. If they look worn out then they are. Like if theyre all ripped up and stuff.
Thread
Thread Starter
Forum
Replies
Last Post
BOOSTED_ITR
General Automotive Chat
11
10-30-2005 06:59 AM
SuprAdam
Automotive Pictures & videos
17
03-17-2005 11:58 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)