tagnetband

Hello Am Aware Of The Codes But Do not Know How To Get Ride Of Them...
I Know how To Get Ride of a Few, But the Rest I have No Clue were To Start.

I Have Codes:

3 MAP Sensor - Faulty Sensor Was Replaced
7 Throttle Angle - Dunno What To Do?????
9 No 1 Cylinder Position - Dunno What To Do????
10 Intake Air Temperature - Faulty Sensor Was Replaced
16 Fuel Injector - Injectors Make Noice And Do Work. Dunno What Else To Do
17 Vehicle Speed Sensor - Replaced Speedometer Cable

The Main Concerns Are With Regards To CODE 7, 9, and 16.

Thank You

phillet

what engine?

tagnetband

The Engine is a 93' DOHC ZC
Droped in a EF(89) With a SI harness.
Running a PG7 ECU

TadoRacing

what ecu you using?check your grounds,#9 goes form dizzy to ecu,tps you'll get the code if its not set right,injectors maybe your peaking them out whats your fuel presure?

TadoRacing

is that the dual point ecu if so thats the problem,

tagnetband

The ECU is a PG7.

My Dizzy has a seperate Cam Sesnsor For The Exhaust Cam. Is That #9 CODE?
How Do I set The TPS??
Fuel Presure Is Unknown Since Im Using a OEM FPR.

TadoRacing

if you get a honda manual for your car it shows how to set tps and you can check the wiring diagrams and follow the dizzy wires