Rep Power: 0

Im looking to get my B16A chipped so i can maybe get a higher top speed is that possible? 190 just doesnt quite cut it haha...

Let me know

Thanks

 
Rep Power: 801

PM me u'r email address

 
Rep Power: 709

I have a b16a too. The reason why you can only hit 190 is because the gears in the b16 tranny are really short. on the highway, in 5th gear, goin 140, my engine revs at 5 and a half grand. 190=8000rpm. theres really no way to get around this, except to get a differently geared tranny. but you wont find any tranny that is better for the b16 than the b16 tranny itself.
You could strap an ls tranny on, but that tranny is geared for torque...something that the b16 doesnt have...the b16's main area is high rpm power.

You cant solve this problem by chipping your computer...because chipping your computer does not physically change your tranny's gears.

 
Rep Power: 704

wuts the best chip for a b16a??

 
Rep Power: 786

^^ None! go get some tuning with crome or hondata.

as for the top speed. you could put in the LS 5th gear or the LS final drive.
the final drive might lengthen all your gears where as just the 5th gear is just that. you'll notice a big RPM drop when going from 4th to 5th

 
Rep Power: 802

i agree with integra mark on this one... i would have said the same thing.

 
Rep Power: 763

If you want your P28 chipped with Crome for your B16 message me, I dont charge much on top of parts and I work in Cobourg so Im easy to get ahold of.

 
Rep Power: 0

how much will it do for my car and how much would you charge im also in Cobourg. . let me know thanks man.