Car Stolen/Wrecked/Gone
02-21-2005, 04:56 PM
#16
~~ Hardcore Newb ~~
Join Date: Feb 2005
Posts: 73
Rep Power: 704 
they are factory 6" so you can pop in aftermarkets anytime you want all you have to do is take out the door panel. ive been looking for another project supra with a near-black interior if you think its too much work for you (no offence not that you cant do it) it would be helpful if you can give me a contact number for this guy.
george
george
02-21-2005, 08:17 PM
#21
~~ Hardcore Newb ~~
Thread Starter
Join Date: Feb 2005
Location: York Region
Posts: 111
Rep Power: 705
Yeah he must have been desparate and freaking out. being drunk probably would do that when he knew he shouldn't be driving it combined with a sus liscence. The cops told us nothing about what happened. you know they told us it just had a flat tire???? HAAHAH The guy at the tow truck place laughed at us. "Flat tire? the car is totaled." He heard it all on the scanner and told us the whole story. Cops in don't know
and yeah this will be a good project if i get it. Ill be putting a metal HG in this one so I can run high boost. I really hope i can get it.
and no i can't fix it. Its a total loss
and yeah this will be a good project if i get it. Ill be putting a metal HG in this one so I can run high boost. I really hope i can get it.
and no i can't fix it. Its a total loss
02-21-2005, 11:33 PM
#27
~~ Hardcore Newb ~~
Join Date: Feb 2005
Posts: 73
Rep Power: 704
yeah 5.5 i would say is a good settlement
keep in mind if you want to put in a metal head gasket you gotta take out the whole engine to get it milled. since its metal to metal the surface of the block and head have to be completely flat or else it will leak.
and if your gonna do that step2 is arp head studs you canot go wrong!!!!
keep in mind if you want to put in a metal head gasket you gotta take out the whole engine to get it milled. since its metal to metal the surface of the block and head have to be completely flat or else it will leak.
and if your gonna do that step2 is arp head studs you canot go wrong!!!!
02-22-2005, 01:53 AM
#29
Skilled GTcars Poster
Join Date: Feb 2005
Posts: 744
Rep Power: 717
Dood.. that really sucks..
I didn't know you're around Sutton area.. I"m not that far from you... Which shop was it that you took it too?? And wats that ers name?? Sounds like a few people that might do that I know of
Guess he went down Markham cause it's a straight nice cruise down 48.
I would be sueing the company unless it's a private party kinda thing. To have someone work on your car thats no LEGALLY suppose to be behind the wheel is bad enough.. but to do it in your clients car is another.
I didn't know you're around Sutton area.. I"m not that far from you... Which shop was it that you took it too?? And wats that ers name?? Sounds like a few people that might do that I know of
Guess he went down Markham cause it's a straight nice cruise down 48.
I would be sueing the company unless it's a private party kinda thing. To have someone work on your car thats no LEGALLY suppose to be behind the wheel is bad enough.. but to do it in your clients car is another.
02-22-2005, 09:12 AM
#30
~~ Hardcore Newb ~~
Join Date: Feb 2005
Posts: 73
Rep Power: 704
whats done is done he got a good settlement so i say just forget about it and look forward to the next project car!
speaking of which blackout has a good point but no way that car will be on the road this summer if you do a (pretty much) whole engine rebuild.
speaking of which blackout has a good point but no way that car will be on the road this summer if you do a (pretty much) whole engine rebuild.