what do i need
#1
what do i need
what would i need for a b series swap into a 99 coupe si, want to know everything because i will be doing this myself. want to keep stock ac. will be using the same obd2 motor. any help thanks...
#3
Ok simply put its pretty well a bolt in kindda thing good luck in running the ac lines you need specialty tools if im not mistaken to rexre them...Its a fairly easy thing to do and here's my list of things i would do if i were in your position...
1st things Good mounts
4 Synthetic litres of oil and a new oil filter (run good oil for the first changes im betting the motors been sitting for some time)
TIMING BELT AND WATERPUMP AND THERMOSTAT (THESE ARE A MUST)
NEW CLUTCH KIT SINCE ITS OUT ALREADY
make sure you have the proper linkages etc for a b series
AXLES
New fluids EVERYTHING BRAKE FLUIDS, ANTIFREEZE, TRANS, POWERSTEERING, ETC
thats the basics of basic and also for your electronics to work better upgrade your ground kit
1st things Good mounts
4 Synthetic litres of oil and a new oil filter (run good oil for the first changes im betting the motors been sitting for some time)
TIMING BELT AND WATERPUMP AND THERMOSTAT (THESE ARE A MUST)
NEW CLUTCH KIT SINCE ITS OUT ALREADY
make sure you have the proper linkages etc for a b series
AXLES
New fluids EVERYTHING BRAKE FLUIDS, ANTIFREEZE, TRANS, POWERSTEERING, ETC
thats the basics of basic and also for your electronics to work better upgrade your ground kit
#4
did a search found nothing. want to know what drive shafts,ac bracket stufff like that so I can have everything needed when I do the swap. Searched the internet found nothing for a 99 si coupe always came up for an eg.
Thread
Thread Starter
Forum
Replies
Last Post
Cyndi S
honda / acura
1
08-29-2007 09:53 PM
Brad Stevens
Honda Mailing List
36
08-18-2007 05:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)