Rep Power: 732

what would i need for a b series swap into a 99 coupe si, want to know everything because i will be doing this myself. want to keep stock ac. will be using the same obd2 motor. any help thanks...

 
Rep Power: 744

do a search on them their is so many forms on hear about them. And their really easy

 
Rep Power: 783

Ok simply put its pretty well a bolt in kindda thing good luck in running the ac lines you need specialty tools if im not mistaken to rexre them...Its a fairly easy thing to do and here's my list of things i would do if i were in your position...

1st things Good mounts
4 Synthetic litres of oil and a new oil filter (run good oil for the first changes im betting the motors been sitting for some time)
TIMING BELT AND WATERPUMP AND THERMOSTAT (THESE ARE A MUST)
NEW CLUTCH KIT SINCE ITS OUT ALREADY
make sure you have the proper linkages etc for a b series
AXLES
New fluids EVERYTHING BRAKE FLUIDS, ANTIFREEZE, TRANS, POWERSTEERING, ETC

thats the basics of basic and also for your electronics to work better upgrade your ground kit

 
Rep Power: 732

did a search found nothing. want to know what drive shafts,ac bracket stufff like that so I can have everything needed when I do the swap. Searched the internet found nothing for a 99 si coupe always came up for an eg.